Panasonic PT-L6600E Operating Instructions Manual

Also see for PT-L6510E: Brochure & specs

Contents

10ENTER button (page 16 and 28)Press this button to enter your menu selection or to runfunctions. The button acts as the right mouse button if theMode switch is set to the Computer position.FREEZE button (page 25)Press this button to temporarily freeze the imagepresently on the screen.SHUTTER button (page 25)Press this button to temporarily mute/black out bothaudio and video.D.ZOOM (+/-) buttons (page 26)Any portion of the picture can be enlarged.VOLUME (+/-) buttons (page 23)Use these buttons to adjust the volume level from theinternal speakers or line levels on the AUDIO OUT lines.FUNC1 button (page 35)Use to select from the functions listed on the “OPTION2” screen that can be chosen from the MAIN MENU.ID SET button (page 15)Use to set the projector ID when multiple PT-L6510E/L6600E projectors are used in the system.Mode switch (Computer/Projector) (page 16)When controlling the projector, set this switch to theProjector (right) side. When controlling your PC, setit to the Computer (left) side.Wired Remote Control port (page 17)When using wired remote control, connect the remotecontrol to the projector with the accessory wiredremote control cable.Remote Control Transmitter WindowWhenever operating the Remote Control, aim this windowto the projector's remote control receiver window.Laser Transmitter WindowClick button (page 16)The button acts as the left mouse button if the Modeswitch is set to the Computer position.Remote control operating indicator lampThe light flashes when any remote control button otherthan the “LASER” button is pressed.POWER button (page 23)Turns the projector ON/OFF when the MAIN POWERswitch on the projector is set to “ I ”.AUTO SETUP button (page 23)Pressing this button automatically corrects picturepositioning on the screen. While the auto setupfeature is active, the message “AUTO SETUP”appears on the screen.RGB button (page 23)Use to toggle through the RGB1, RGB2, and DVI-Dinput ports.LASER button (page 15)While this button is pressed and held, the remotecontrol activates its laser transmitter to display a laserpointer on the screen.VIDEO button (page 16 and 23)Use to toggle between the Composite Video and S-Video ports. The button acts as the Page Down buttonif the Mode switch is set to the Computer position.MENU button (pages 16, 27 and 28)Main Menu display is switched on and off alternatelyeach time this button is pressed. If the menu hasmultiple pages, this button may be used to view thenext or previous menu page. The button acts as thePage Up button if the Mode switch is set to theComputer position.Arrow ( ) buttons (page 16 and 28)Use to choose menu items, change settings, or adjustcontrol parameters. The button acts as a mouse, socan move the cursor if the Mode switch is set tothe Computer position.Remote ControlLocation and function of each part