Panasonic PT-L6600E Operating Instructions Manual

Also see for PT-L6510E: Brochure & specs

Contents

45ENGLISHBefore asking for service ---Before asking for service, cheque the following points.Cheques• Is the power cord plug correctly plugged in?• Is the MAIN POWER turned on?• Is electricity running to the power outlet?• Is the temperature monitor (TEMP) indicator on the front of the unit flashing orturned on? (See page 40)• Is the lamp monitor (LAMP) indicator on the front of the unit flashing or turned on?(See page 40)• Is the lamp unit door installed correctly?• A wrong ID is set. (See pages 15 and 36)• Is the lens cap still on the lens?• Is the image input correctly connected?• Is the input mode set correctly? (See page 23)• Is the black level adjustment set at the minimum level? (See page 30)• Is the equipment connected to the projector operating correctly?• Is the shutter function turned on? (See page 25)• Is the lens focused properly? (See page 23)• Is the projection distance correct? (See page 18)• Is the lens dirty?• Is the projector positioned directly in front of the screen? (See page 18)• Is the colour density and colour tone setting correct? (See page 30)• Is the equipment connected to the projector correctly adjusted?• Is the sound input correctly connected?• Is the volume set to the minimum level? (See page 23 and 27)• Is the shutter or mute turned on? (See page 25 and 35)• Is the cable connected to the AUDIO OUT terminal?• Are the batteries exhausted?• Are the battery polarities set correctly? (See page 14)• Are their any obstacles between the remote control and the remote control sensor?(See page 14)• Are you trying to operate the remote control beyond its operable range? (See page 14)• Are you controlling from external equipment using the REMOTE terminal? (Seepage 39)• Is their any external light interfering with remote control operation?• A wrong ID is set. (See pages 15 and 36)• Is the input mode properly set? (See page 23)• Is the correct signal system (TV system) selected? (See page 31)• Are their any malfunctions on the source side, such as bad video tapes?• Are you inputting a signal that is not compatible with this projector? (See page 48)Power doesnot turn onNo imageImage is blurredLight colour/bad colour toneNo soundRemote controldoes not operateAbnormal imageSymptoms• Is the cable too long?• Is the video output signal setting of the notebook computer correctly set?Setting : key (Read the operating instructions of the your PC.)Does not displayimages from PCs