6Do not place liquid containers on top of the projector.• If water spills onto the projector or gets inside it, fire or electric shocks could result.• If any water gets inside the projector, contact an Authorized Service Centre.Do not insert any foreign objects into the projector.• Do not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing socan result in fire or electric shocks.After removing the battery from remote control unit, keep it away from the reach of children.• The battery can cause death by suffocation if swallowed.• If the battery is swallowed, seek medical advice immediately.Do not allow the + and - terminals of the battery to come into contact with metallic objectssuch as necklaces or hairpins.• Failure to observe this may cause the battery to leak, overheat, explode or catch fire.• Store the battery in a plastic bag and keep it away from metallic objects.Insulate the battery using tape or similar before disposal.• If the battery comes into contact with metallic objects or other batteries, it may catch fire or explode.A child in not made to use remote control and do not look into the laser beam emitted fromthe remote control.• Although laser emission from the remote control is not harmful to human health, do not look directly into the laserbeam or aim it at another person.• Laser radiation can cause injury to the human eye.CautionDo not set up the projector in humid or dusty places or in places where the projector maycome into contact with smoke or steam.• Using the projector under such conditions may result in fire or electric shocks.When disconnecting the power cord, hold the plug, not the cord.• If the power cord itself is pulled, the cord will become damaged, and fire, short-circuits or serious electric shocksmay result.Always disconnect all cables before moving the projector.• Moving the projector with cables still attached can damage the cables, which could cause fire or electric shocks tooccur.Do not place any heavy objects on top of the projector.• Failure to observe this may cause the projector to become unbalanced and fall, which could result in damage orinjury.Do not short-circuit, heat or disassemble the battery or place it into water or fire.• Failure to observe this may cause the battery to overheat, leak, explode or catch fire, and burns or other injury mayresult.When inserting the battery, make sure the polarities (+ and -) are correct.• If the battery is inserted incorrectly, it may explode or leak, and fire, injury or contamination of the battery compartmentand surrounding area may result.Use only the Specified battery.• If an incorrect battery is used, it may explode or leak, and fire, injury or contamination of the battery compartmentand surrounding area may result close to this port, otherwise burns or damage could result.Precautions with regard to safety