Panasonic PT-LB78E Operating Instructions Manual

Also see for PT-LB75E: Specifications Service manual Service manual

Contents

Panasonic PT-LB78E Operating Instructions Manual Manual pdf 26 page image

Basic OperationRemote control operationENGLISH - 26You can switch the input method manually bypressing the COMPUTER, WIRELESS(PT-LB80NTE/PT-LB75NTE only) and VIDEObuttons. Press the required button severaltimes or I H to cycle through the inputmethods as follows.You can confirm the selected input method in displayedgraphical input guide on the upper right of the screen.Highlighted in yellow is selected terminal. See “INPUTGUIDE” on page 36.Q Pressing the COMPUTER buttonQ Pressing the WIRELESS buttonThe WIRELESS button is only for PT-LB80NTE/PT-LB75NTE.See CD-ROM contents for more detailed information.Q Pressing the VIDEO buttonQ Pressing the INPUT SELECT button onthe projectorPress the FREEZE button to capture the imageand you can see it as a still picture. While theimage is frozen, the audio sound through theprojector will stop. Press the FREEZE button again toescape and return to the continuing image.You can stop the projection and audio soundthrough the projector temporarily for savingelectrical power. Press the AV MUTE button again toescape.You can reset most of the customised settingsto the factory defaults by pressing theDEFAULT button of the remote control. Displaythe required sub menu or the menu items and press theDEFAULT button again.See “Main menu and Sub-menu” on page 30.Switching the input signalCOMPUTER1 COMPUTER2NOTE:• Only when the COMPUTER2 SELECT is set to INPUT,you can switch between COMPUTER1 andCOMPUTER2.• With no signals from COMPUTER terminals, thecomputer connecting guidance will be displayed. See“Computer connection guidance” on page 48.VIDEO S-VIDEOCOMPUTER2COMPUTER1S-VIDEOWIRELESS*1*1. WIRELESS is only for PT-LB80NTE/PT-LB75NTE.VIDEONOTE:• Switched signal may be displayed after a short interval.• If you select an unplugged input method, the input guidance will blink on and off several times.• See “List of compatible signals” on page 46.• See “Connections” on page 19.Capturing an imageStopping the projection temporaryResetting to the factory default settingsNOTE:• Some menu items are not available to reset by pressingthe DEFAULT button. Adjust each menu itemsmanually.• To reset all the settings to the factory defaults, see“INITIALIZE ALL” on page 38.