Basic OperationRemote control operationENGLISH - 27You can project an image split in 2 windowsas an INDEX-WINDOW. One is frozen andstored in memory, and displayed on thescreen’s left side while displaying subsequent imagecontinues on the right.Press the MENU or RETURN button to escape.Q Switching the positionIn default, the frozen image is displayed on the leftand the subsequent image is displayed on theright. Press I H to switch the position.Q Changing the image sizePress F G to capture a new image and changethe size in 3ways.Q Capturing a new imageWhile in INDEX-WINDOW mode, press theENTER button to capture a new image and thefrozen image window will be updated in a moment.You can assign a selected function to theFUNCTION button.Following functions are assignable. See“FUNCTION BUTTON” on page 38 for assigningprocedure.You can control the volume of the built-inspeakers and output audio sound. Press “+”side of the VOLUME button to increase and“-” to decrease.Projecting an image in INDEX-WINDOW modeProjected image Frozen imageContinuing imageFrozen imageContinuing imageContinuing imageFrozen imageNOTE:• If you change the window size, the aspect ratio of theimage is changed and becomes vertically elongated.NOTE:• When capturing a quick moving picture, performseveral times to get a stabled picture.Frozen imageContinuing imageUsing an assigned functionAV MUTE See “Stopping the projectiontemporary” on page 26.FREEZE See “Capturing an image” onpage 26.AUTO SETUPSee “Setting up the imageposition automatically” onpage 25.INDEX-WINDOWSee “Projecting an image inINDEX-WINDOW mode” onpage 27.ASPECT See “ASPECT” on page 34.PICTURE MODE See “PICTURE MODE” onpage 32.Controlling the volume of the speaker