Panasonic PT-LB78E Operating Instructions Manual

Also see for PT-LB75E: Specifications Service manual Service manual

Contents

Panasonic PT-LB78E Operating Instructions Manual Manual pdf 36 page image

ENGLISH - 36SettingsOPTION menuWhen you change the input method, the guidanceappears in the upper right corner of the screen. Thefollowing display methods are available. Press I H tocycle through the options.You can switch the logo on/off that is displayed whenstarting up the projector. Press I H to select therequired option. STARTUP LOGO will be displayed for30 seconds.ON ActiveUSER Display the original textOFF DeactiveQ Editing the original textIf you select USER, you can display a 2 lines oforiginal text which contains up to 40 characters ineach.1. Select USER and press the ENTER button.2. Select the required line to enter or edit the originaltext, and press the ENTER button.3. Use F G I H to specify the location of therequired character and press the ENTER button.The selected character will be displayed in the box.4. Repeat the step 3 until you finish the text to displayin a line.To delete all the entered characters, move the cursorto ALL DELETE and press the ENTER button.To insert a character in the entered text line, movethe cursor to the text box to select the required place,and press G and return to the character field.To delete a character, press the DEFAULT button ormove the cursor to the required character then pressthe DEFAULT button.5. Select OK and press the ENTER button to set theentered text in a box.Press G and edit the TEXT2 if you need to, andrepeat the step 3 - 5.Select CANCEL or press the MENU/RETURN buttonto return to the previous menu without setting.You can switch the function of the COMPUTER2 IN/1 OUT terminal.INPUT COMPUTER2 INOUTPUT COMPUTER1 OUTThe projector will detect the signal from theCOMPUTER1 IN or COMPUTER2 IN/1 OUT terminal ifthe signal is RGB or YP B P R. You can turn off theautomatic system and switch the settings manually.AUTO Automatic adjustmentRGB For RGB signalsYPBPR For YPB PR signalsWhen projecting WIDE signals, switch to ON to displaythe image in well adjusted size.OFF For 4:3 signalsON For WIDE signals(16:9, 16:10 and 15:9)INPUT GUIDEOptions FunctionDETAILEDDisplay the input method by graphic. TheINPUT GUIDE will go out after10 seconds without any operation.If you select any of the COMPUTERterminals which has no signal, thecomputer connection guidance will bedisplayed. See “Computer connectionguidance” on page 48.SIMPLEDisplay the input method by text. TheINPUT GUIDE will go out after5 seconds without any operation.OFF Turn off the guidance.STARTUP LOGOMENU RETURNRemote control Control panelSee “Navigating through the MENU” on page 29.See “Main menu and Sub-menu” on page 30.OK CANCELALL DELETESPACETEXT CHANGECOMPUTER2 SELECTRGB/YP B PRNOTE:• Available with VGA60, 480i, 576i, 480p,576p,1 125 (1 080)/60i, 1 125 (1 080)/50i, 720/60p,720/50p only.• When the input signal is not selected correctly withAUTO setting, select RGB or YPB PR manually.WIDE MODE