Panasonic PT-LC56E Operating Instructions Manual

Panasonic PT-LC56E Operating Instructions Manual Manual pdf 12 page image

ENGLISH -23 Basic Operation22-ENGLISHTurning on the powerBefore turning on the power1, Ensure that all componentsare connected properly.2, Connect the accessory mains lead.3, Remove the lens cover.#ENTERFREEZE SHUTTERINDEXWINDOWPROJECTORVOLUME D.ZOOMSTDVIDEOINPUTPOWERRGBMENUAUTOSETUP)*$&('Power indicatorMains leadLens coverPress the MAIN POWER switch to turn on thepower.BThe power indicator on the projector will illuminate red.Press the POWER button.BThe power indicator on the projector will flash green. After a shortperiod, the indicator will illuminate green, and a picture will beprojected.Turn on the power of all connected devices.BStart the Play function of a device such as a DVD player.NOTE:B A tinkling sound may be heard while the power indicator is turned off,but this is not a sign of a malfunction.Press the input select button to select theinput signal.BA picture will be projected in accordance with the selected input signal.Follow the procedure below when you set the projector up first, and whenyou change the setup place.Press the AUTO SETUP button to initiateautomatic positioning.BThe tilt of the projector and the inputsignal will be detected and keystonedistortion and the position of theimage will be corrected.(Refer to page 26 for details.)Adjusting the sizeBTurn the zoom ring to adjust the size of the projected image.Adjusting the focusBTurn the focus ring to adjust the focus of the projected image.AUTO SETUPInput selectbuttonsChangingsignalsVIDEO RGB&')*(#$%Adjusting the angleBWhile pressing the adjusterbuttons, adjust the forward/backangle of tilt of the projector.Adjustso that the projector is as vertical tothe screen as possible.