PreparationAbout Your ProjectorENGLISH - 14Battery compartment1. Press the tab and lift up the cover.2. Insert the batteries according to the polarity diagramindicated inside.Top view(page 23)Attaching a handstrapYou can attach a favorite strap onto the remote control.Remote controlPOWER buttonSwitch between stand-bymode and projection mode.(page 19/page 20)INPUT SELECT buttonsSwitch the required inputsignal button to select.See CD-ROM contents theWIRELESS button.See CD-ROM contents forthe PAGE buttonsDisplay the main menu.(page 27)Navigate through themenus with FGIH, andactivate the menu item withENTER button. (page 27)Reset some of the settings tothe factory default settings.(page 24)Turn off the projectiontemporarily. (page 24)See CD-ROM contentsthe MULTI-LIVE button.Control to adjust thevolume of the speaker.(page 25)Return to the previous menu.(page 27)Capture the projected imageas a frozen picture. (page 24)Detect the input signal and thesetting of POSITION, DOTCLOCK and CLOCK PHASEin POSITION menu will beadjusted automatically forCOMPUTER signals. (page 23)See CD-ROM contents theCOMPUTER SEARCHbutton.Control to change thescale by means of digitalzoom. (page 26) Assign a useful function forshortcut. (page 25)Display the frozen imagewhile the display ofsubsequent imagescontinues. (page 25)Remote control signalemittersNOTE:• Do not drop the remote control.• Avoid contact with liquids or moisture.• Use manganese batteries or alkaline batteries with the remote control.• Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs.• Do not keep pressing the remote control buttons as this may shorten battery life.• See “Remote control operation” on page 23.