Panasonic PT-P1SDU Operating Instructions Manual

Contents

E NGLISH -33 Useful functions32-ENGLISHInserting and removing the SD memory cardInserting# Insert the SD memory card with thelabel side facing upward until a click isheard.B The input signal will switch to “SD”automatically. If the projector is instandby mode, the lamp will turn onautomatically, and then the input signalwill switch to “SD”.Removing# Push in the middle of the SD memorycard. (A click will be heard.)$ Remove the card.NOTE:B We shall not be responsible for any damage, whether direct or indirect,caused by the use of or by the fault of the product.B We shall not be responsible for any data corruption and loss caused bythe product.Using the SD memory cardInformation on the SD memory card (sold separately)The SD memory card is a semiconductor memory with a size of 24 mm x32 mm x 2.1mm, as small as a postage stamp, and is expected to be a next-generation recording medium that will replace MDs (minidiscs), CDs(compact discs) and cassette tapes. It allows repetition of data reading,writing and deleting. This projector can be used to play back still image dataand moving image data that has been recorded by digital cameras as well aspresentation data whose format has been converted by ImageCreator 1.5.Notes on using SD memory cardsB Do not disconnect the power cord and do not remove the SD memorycard while files are being played back. Failure to observe this mayresult in data corruption or data loss.B Be sure to make a backup of the data stored in the SD memory card.Note that important user data may be subject to potential corruptionalthough it very rarely occurs.B When using a miniSDTM card, be sure to attach the miniSDTM cardadapter. Insert and remove the miniSDTM card with the adapterattached.B If only the miniSDTM card adapter is inserted into the SD memory cardslot, the projector will not operate correctly. Be sure to use the miniSDTMcard adapter with the miniSDTM card inside.B Correct operation of a MultiMedia Card in the projector is not guaranteed.B Use of a Panasonic SD memory card is recommended.Data that can be played backOnly folder and file names that comply with the DCF standard will berecognized. (Refer to page 66 for details on the DCF standard.)Still image data:The format for still images is Exif2.2-compliant JPEG.B Still image data recorded by the LUMIX Panasonic digital camera.B Still image data whose format has been converted by ImageCreator 1.5.Moving image data:The format for moving images is QuickTime Motion JPEG.B Moving image data recorded by the LUMIX Panasonic digital camera.ImageCreator 1.5ImageCreator 1.5 is software that allows you to convert image formats forpresentation files made by Microsoft PowerPoint® to a format that can be playedback by this projector. You can download ImageCreator 1.5 from our website.http://panasonic.co.jp/pavc/projectorRefer to the operating instructions for ImageCreator 1.5 that can also bedownloaded from the website above for details on operation.NOTE:B Always be sure to check that the files in the SD memory card are notbeing played back before removing the SD memory card. Failure toobserve this may result in data corruption or data loss.NOTE:B If you try to force the SD memory card to go in the wrong way, it maydamage the SD memory card and the card slot.