Error information pageWhen [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it todisplay the error/warning details.f The projector may go into the standby status to protect the projector depending on the contents of the error.11 Self-diagnosis result displayDisplays the item check results.[OK]: Indicates that operation is normal.[FAILED]: Indicates that there is a problem.[WARNING]: Indicates that there is a warning.r [FAILED] items displayed when a problem occursParameter Description[FAN] Trouble has occurred in the fan or its drive circuit. Consult your dealer.[FAN(INTAKE1)] Trouble has occurred in the intake fan 1.[FAN(INTAKE2)] Trouble has occurred in the intake fan 2.[FAN(INTAKE3)] Trouble has occurred in the intake fan 3.[FAN(INTAKE4)] Trouble has occurred in the intake fan 4.[FAN(EXHAUST)] Trouble has occurred in the exhaust fan.[FAN(LAMP)] Trouble has occurred in the lamp cooling fan.[INTAKE AIR TEMPERATURE] The air intake temperature is too high. The projector may be used in an operatingenvironment where the temperature is high, such as near a heating appliance.[EXHAUST AIR TEMPERATURE] The exhaust air temperature is high. The air exhaust port may be blocked.[LAMP REMAIN TIME] The lamp runtime has exceeded the prescribed cumulative time, and it is nowtime to replace the lamp.[LAMP STATUS] The lamp has failed to light.Wait a short while for the lamp to cool off, and then turn on the power.[APERTURE (CONTRAST-SHUTTER)] Trouble has occurred in the contrast shutter circuitry. Consult your dealer.[AIR FILTER] There is too much dust accumulated in the air filter unit. Turn off the projector andunplug the power plug from the wall outlet, then replace the air filter unit.[Network status] pageClick [Status] → [Network status].The current network setting status is displayed.104 - ENGLISHChapter 4 Settings - [NETWORK/USB] menu