Panasonic PT-VW535N Operating Instructions Manual

Also see for PT-VW535N: Operating instruction Operating instructions

f It is possible to project the images which are stored in iPad / iPhone / iPod touch / Android and are sent to the projector byusing the dedicated application. For more information on how to use the application software, refer to the application guidedescribed in the following URL.[iOS support site] http://panasonic.net/avc/projector/ios/[Android support site] http://panasonic.net/avc/projector/android/[WIRELESS DETAILED SETUP]You can configure more precise network settings, if you select [SIMPLE], [M-DIRECT] or [USER1] ~ [USER3] (user) is set to[NORMAL] for [WIRELESS LAN] in the network menu. For network settings, contact your network administrator.Detailed setup of [SIMPLE]Simple connection mode and compatible with all OS (Windows / Mac / iOS / Android etc.).1) Press the button when [SIMPLE] is selected.f The [WIRELESS DETAILED SETUP] screen is displayed.2) Press the button.f The [KEY] screen is displayed.3) Press asqw to change the key according to the instructions.[KEY] Setting a key for the access point. Input either 8 to 15 alphanumerics.4) Press as to select [OK], and press the button.r Default setting of [SIMPLE]fThe following setting is set before the projector leaves the factory.[KEY] proj + The last 4 digits of the network IDDetailed setup of [M-DIRECT]Use this setting when the projector is used as a simple access point. Even if there is no access point, you can still connect theprojector to computer via the infrastructure.In addition, the connection with iPad / iPhone / iPod touch / Android is much easier.1) Press the button when [NORMAL] is selected.f The [NORMAL] screen is displayed.2) Press qw to select [M-DIRECT], and press the button.f The [WIRELESS DETAILED SETUP] screen is displayed.3) Press as to select an item, and press qw to change the setting according to the instructions.[IP ADDRESS] Enter the IP address.[SUBNET MASK] Enter the subnet mask.[SSID] Select M-DIRECT in Wireless LAN, then the SSID can be set.[CHANNEL] Select M-DIRECT in Wireless LAN, then the Channel can be set.1~11[KEY]Select M-DIRECT in Wireless LAN, then the KEY can be set.Setting a key for the access point. Input either 8 to 63 alphanumerics or a 64 digitstring in the hexadecimal format.4) Press as to select [OK], and press the button.r Default setting of [M-DIRECT]f The following settings are set before the projector leaves the factory.[IP ADDRESS] 192.168.12.100[SUBNET MASK] 255.255.255.0[SSID] M-DIRECT + The last 4 digits of the network ID[CHANNEL] 1[KEY] The same string as the SSIDNotef The authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fixed.f When you need to change initial configuration of [M-DIRECT], please contact your network administrator.f The initial setting is [KEY], there is a risk that the leakage of information by a third party. Change the initial setting isnecessary.f As the DHCP server is already functioning, select [ON] before connecting a computer.ENGLISH - 91Chapter 4 Settings - [NETWORK/USB] menu