[DEFAULT] Factory default setting.[HIGH] Becomes a bluish image. Select this when the white areas of the projected image are reddish.[LOW] Becomes a reddish image. Select this when the white areas of the projected image are bluish.[IRIS]Aperture correction and signal compensation are performed automatically based on the image to result in an image of optimumcontrast.1) Press as to select [IRIS].2) Press qw or the button.f The [IRIS] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] No correction.[ON] Corrects the aperture.[ADVANCED MENU]You can perform more advanced image adjustment.1) Press as to select [ADVANCED MENU].2) Press the button.f The [ADVANCED MENU] screen is displayed.3) Press as to select one item among [CONTRAST R] ~ [BRIGHTNESS B].4) Press qw or the button.f The individual adjustment screen of items are displayed.5) Press qw to adjust the value.Items Operation Adjustment Adjustment range[CONTRAST R] Press the w button. Emphasizes red in highlight areas. -32 ~ +32Press the q button. Deemphasizes red in highlight areas.[CONTRAST G] Press the w button. Emphasizes green in highlight areas. -32 ~ +32Press the q button. Deemphasizes green in highlight areas.[CONTRAST B] Press the w button. Emphasizes blue in highlight areas. -32 ~ +32Press the q button. Deemphasizes blue in highlight areas.[BRIGHTNESS R] Press the w button. Emphasizes red in shadow areas. -32 ~ +32Press the q button. Deemphasizes red in shadow areas.[BRIGHTNESS G] Press the w button. Emphasizes green in shadow areas. -32 ~ +32Press the q button. Deemphasizes green in shadow areas.[BRIGHTNESS B] Press the w button. Emphasizes blue in shadow areas. -32 ~ +32Press the q button. Deemphasizes blue in shadow areas.[DAYLIGHT VIEW]You can correct the image to the optimal vividness even if it is projected under a bright light.1) Press as to select [DAYLIGHT VIEW].2) Press qw or the button.f The [DAYLIGHT VIEW] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Enables auto correction of [DAYLIGHT VIEW]. The brightness of the room is detected by theluminance sensor, and the vividness of the image is automatically corrected.[ON] Enables [DAYLIGHT VIEW].[OFF] Disables [DAYLIGHT VIEW].ENGLISH - 59Chapter 4 Settings - [PICTURE] menu
