Panasonic PT-VX400 Operating Instructions Manual
Also see for PT-VW330E: Command manualOperating instructions
                                                                                | |
Contents
| 
Setting52 - ENGLISHSettingsLogo PIN code changeJLogo PIN code can be changed to your desired four-digit number.Press ▲▼ to select [Logo PIN code1 )change].Press the 2 ) Current logo PIN code dialog box appears.zPress ▲▼ to enter the current code.3 ) The New Logo PIN code input dialog boxzappears. Set a new Logo PIN code, aconfirmation box appears, choose [Yes] to setthe new Logo PIN code.AttentionBe sure to note the new Logo PIN code and keep it onzhand. If you lost the number, you could no longer changethe Logo PIN code setting.HDMI setupThis function is only used for HDMI input source.Press ▲▼ to select [HDMI setup].1 )Press ► or the 2 ) The names for the output setting of Digital R/G/zB vary from equipment to equipment.ImageJNormal When the output of Digital R/G/Bequipment is set to Standard.Enhanced When the output of Digital R/G/Bequipment is set to Enhanced.SoundJHDMI When Digital input source is input,Sound is set to HDMI.Computer2When DVI input source is changedto HDMI input source, Sound is setto Computer 2.AttentionFor details, refer to the operating instructions of yourzDigital R/G/B equipment.TerminalThe COMPUTER IN 2/MONITOR OUT terminal onthe back of the projector is switchable for computer 2input or monitor output.Press ▲▼ to select [Terminal] and1 )then press the Press ▲▼ to switch the item.2 )Computer 2 Computer inputMonitor out Monitor outNoteTerminal function is not available when selectingz[Computer 2] to the input source. Change the inputsource to the others (HDMI or Computer 1 or Video) sothat the Terminal function will be available.P IN P (PT-VW330E Only)This function is used to project two imagessimultaneously by placing a separate small subscreen within or next to the main screen.Press ▲▼ to select [P IN P].1 ) You can also press the button on the zremote control to display [P IN P] menuPress ► or 2 )access the submenu.Only the sound from the source of Main picturezis valid, while the source of Sub picture cannotoutput the sound.ModeJPress ▲▼ to select [Mode] and then1 )press the Press ▲▼ to select one mode among2 )the items as below.P IN P Provide the images of Main pictureand Sub picture at the ratio ofScreen aspect in the Screen Menu.Side bySideProvide the images of Main pictureand Sub picture at the ratio of 4:3.Off Turn off the P IN P function.AttentionIn [P IN P] the larger picture is main picture, and thezsmaller one is sub picture; in [Side by side], the leftpicture is main picture, and the right one is sub picture. |
Related manuals for Panasonic PT-VW330E
Panasonic PT-VX400NTU Operating Instructions Manual
Panasonic PT-VX400NTE Operating Instructions Manual
Panasonic PT-VX41 Operating Instructions Manual
Panasonic PT-VX41U Operating Instructions Manual
Panasonic PT-VX41E Operating Instructions Manual
Panasonic PT-VX430 Operating Instructions Manual
Panasonic PT-VX42Z Operating Instructions Manual
Panasonic PT-VX425N Operating Instructions Manual
Panasonic PT-VX41EA Operating Instructions Manual
Panasonic PT-VX431K Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine