Panasonic PT-VX400 Operating Instructions Manual

Also see for PT-VW330E: Command manual Operating instructions

Contents

Panasonic PT-VX400 Operating Instructions Manual Manual pdf 58 page image

Information58 - ENGLISHSettingsSelect [Information] from the Main Menu (see“Navigating through the menu” on page 34),then select the item from the sub-menu.Remote Control Control PanelInput Source InformationDisplayThe Information Menu is used for checking the statusof the image signal being projected and the operationof the projector.You can also Press the button on the remotecontrol to display the Information menu.InputJThe selected input source is displayed.SystemJThe selected system is displayed.H-sync freq.JThe selected H-sync freq. is displayed.The horizontal frequency of the input signal isdisplayed in KHz, or - - - KHz when no signal.V-sync freq.JThe selected V-sync freq. is displayed.The vertical frequency of the input signal is displayedin Hz, or - - - Hz when no signal. Numbers of Hzdoubles when during Interlace.ScreenJThe selected Screen size is displayed.LanguageJThe selected language is displayed.Lamp powerJThe selected lamp mode is displayed.Lamp runtimeJThe cumulative lamp operating time is displayed.Power managementJ[Off] , [Ready] or [Shut down], and [Timer] aredisplayed.Key lockJThe selected Key lock icon is displayed.PIN code lockJ[Off], [On 1] or [On 2] is displayed.Remote controlJThe selected remote control code is displayed.Serial numberJThe serial number of the projector is displayed.The serial number is used to service the projector.Total power savingsJThe saved amount of power and the exhausted CO2are displayed.Information