Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

Contents

Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual Manual pdf 127 page image

Ceiling mount bracket safeguardsENGLISH - 127 AppendixCeiling mount bracket safeguardsWhen installing the ceiling mount bracket to the projector, install the accessory Drop-prevention bracket (Safetycables) to the projector.(The projector will still be safe if they are not used, however they will help prevent the possibility of accidentscaused by the projector falling down if the screws happen to become loose.)Ceiling bracket : For high ceiling : ET-PKD310H, For low ceiling : ET-PKD310S,Ceiling Mount Attachment : ET-PAD310Installation work of the ceiling mount bracket should only be carried by aqualified technician according to the following procedure.Panasonic takes no responsibility for any losses or damage occurring as a result of using a ceiling mountzbracket not manufactured by Panasonic, or if damage to the projector occurs as a result of an inappropriatelocation used for installing the ceiling mount bracket, even if the projector’s warranty period has not yet expired.Use a torque screwdriver or similar tool to tighten the screws. Do not use tools such as electric screwdrivers orzimpact screwdrivers.An unused ceiling mount bracket should be removed promptly by qualified technician.zDo not use the screw holes of the front leg adjusters for the projector installation.zDo not attach the safety cable to the burglar hook port and suspend the projector on it.zFor how to install wire ropes to the ceiling, see the installation manual for the ceiling mount bracket.zFor details, see the installation manual for the ceiling mount bracket.zThe part numbers of accessories and separately sold components are subject to change without notice.zAttachment procedureTurn the projector upside down and1 )place it gently on a soft cloth.Put the plain washer on the wire rope2 )fixing screw.Put the wire rope through the wire rope3 )fixing screw.Install the wire rope fixing screws to the4 )projector and tighten them.Install the wire ropes to the 2 places in a similarzmanner.Wire rope fixing screw: M6 x L20.Tightening torque of fixing screw: 4 ± 0.5 NmAttentionDo not use other than the provided Wire rope fixing screw (x2), washers (x4) and Safety cables (x2).zInstall the wire ropes so that they do not sag between the installation portions on the body and those on the ceiling.zCeiling bracket(Metal fitting attached to the ceiling mount bracket or projectormetal fitting for the ceiling mount bracket)Wire ropePositions to installwire ropes to bodyPlain washerWire rope fixing screwWasherPlease also attach the washerwhich is additional accessory tothe ceiling mount.Ceiling mount

/ 129

Related manuals for Panasonic PT-DS8500