Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

Contents

Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual Manual pdf 41 page image

ENGLISH - 41 Basic OperationProjectingCheck the connections of the peripheral devices, installation of the projection lens (Æpage 37), and connectionof the power cord (Æpage 38) and switch on the power (Æpage 39) to start the projector. Select the input signaland adjust the image.Selecting the input signalSelect an input signal.The image selected with button isprojected. (Æpage 46)AttentionImages may not be projected properly depending on thezconnected device and DVD, video tape, etc. to be played.Select a system format that is suitable for the input signalusing the [SYSTEM SELECTOR] in the [PICTURE] menu(Æpage 57).Check the aspect ratios of the screen and the image andzselect the optimum aspect ratio using [ASPECT] in the[PICTURE] menu (Æpage 58).How to adjust the focus,zoom and shiftUse the Lens Shift, Zoom, and Focus controls toproperly frame the image on the screen.J At the projectorPress button on the control1 )panel.Pressing the button changes the setup screenzin the order of [FOCUS], [ZOOM] and [SHIFT].Press ▲▼◄► to select an item and2 )adjust it.J Using the remote controlPress (FOCUS, ZOOM, SHIFT)1 )button on the remote control.Press button :zAdjust focus.Press button :zAdjust zoom.Press button :zAdjust focus.Press ▲▼◄► to select an item and2 )adjust it.NoteBe careful not to catch your fingers between the lens andzshroud when shifting the lens.The zoom adjustment menu will be displayed only whenza lens with zoom function is installed.When using ET-D75LE5, set the shift to the homezposition.The adjustment can be performed faster by pressing andzholding the ▲▼◄► for about 7 seconds or more.It is recommended that the images are projectedzcontinuously for at least 30 minutes before the focus isadjusted.If the power is turned off during focus or shift adjustment,zthe LENS CALIBRATION must be performed when thepower is turned on next time.If the main power is turned off during focus adjustment,zthe LENS CALIBRATION will be performed automaticallywhen the focus is adjusted next time.If the main power is turned off during shift adjustment,z“LENS CALIBRATION ERROR” is displayed when theshift is adjusted next time. Please perform the [LENSCALIBRATION] from the menu (Æpage 85)If “LENS CALIBRATION ERROR” is still displayed afterzthe LENS CALIBRATION is performed, ask your dealerfor repair.