PROJECTOR SETUP menu86 - ENGLISHSettingsSAVE ALL USER DATAThis saves various setting values as a backup to theinternal memory of the projector.Press ▲▼ to select [SAVE ALL USER1 )DATA].Press button.2 ) The [SECURITY PASSWORD] screen will bezdisplayed.Enter the password set for the3 )[SECURITY PASSWORD].The confirmation screen will be displayed.zPress ◄► to select [OK], and press4 ) button.LOAD ALL USER DATAThis loads various setting values that were saved as abackup to the internal memory of the projector.Press ▲▼ to select [LOAD ALL USER1 )DATA].Press button.2 ) The [SECURITY PASSWORD] screen will bezdisplayed.Enter the password set for the3 )[SECURITY PASSWORD].The confirmation screen will be displayed.zPress ◄► to select [OK], and press4 ) button.NoteIf this is executed, the projector enters a standby state inzorder to reflect the setting values.INITIALIZEThis returns various setting values to their factorydefault settings.Press ▲▼ to select [INITIALIZE].1 )Press button.2 ) The [SECURITY PASSWORD] screen will bezdisplayed.Enter the password set for the3 )[SECURITY PASSWORD].The [INITIALIZE] screen will be displayed.zPress ▲▼ to select the desired4 )initialize item.ALL USERDATAAll setting values including [ENTRYSIGNAL], [NETWORK/E-MAIL], and[LOGO IMAGE] are returned to theirfactory default values.The projector enters a standby statein order to reflect the setting values.ENTRYSIGNALAll setting values saved for each ofthe input signals are cleared.To clear just some registeredsignals, perform the proceduredescribed in “Deleting a registereddata” (Æpage 89).NETWORK/E-MAILAll setting values in [NETWORKSETUP] and [E-mail setup] settingswill return to factory settings.LOGO IMAGEThe registered image data for[LOGO1] will return to factorysettings.Press button.5 ) The confirmation screen will be displayed.zPress ◄► to select [OK], and press6 ) button.SERVICE PASSWORDThis function is used by a service person.
