Ii function indication 1uch as the remainingime indication or the _,lapsed time indication isot shown.Recording does not startalthough power issupplied to this unit.itecording starts but 1ops immediately. _@he playback picturereaks up for a moment.ITthe operation arbitrarilyops. _ _@_fRecording stopssuddenly during motionpicture recording on anSD card.Recorded still picturesare not clear. _,_>_,,AUto focus function does _ot work. J• If you set [SETUP]--_[DISPLAY]--_[OFF]. indications otherthan warnings and date are not displayed• No recording Js possible while the SD card's write protectswitch is set to LOCK. (_ 23)• If the HDD or SD card has no more available memory, freeup some memory by deleting unnecessary scenes (-_ 59)or use a new SD card• Is the unit set to the video recording mode or picturerecording mode?• f the SD card slot cover is open, this unit may not operatenormally. Close the card slot cover.• The unit is hot. Follow the messages on the display. To usethe unit again, turn the unit off and leave it for a while.• If the recording stops when the HDD is used. back up thedata on the HDD to a PC. etc. and then format the HDD.(4 71)• The drop detection function has activated to protect theHDD. Do not drop or shake this unit while operating it.• Use an SD card that can be used for motion picturerecording. (4 24)• When using an SD card on which data has been writtenmany times and the data writing speed has reduced, therecording may suddenly stop during motion picturerecording. Back up the data on the SD card to a PC. etc.and then format the SD card. (-_ 71• If you try to record small or finely detailed objects with[PICT.QUALITY] set at [=k], the images may break up intoa mosaic-like pattern. Record with [PICT.QUALITY] set at[=|I] instead. (4 391• Press the AUTO button• There are some recording subjects and surroundings forwhich the auto focus does not operate correctly. (4 112) Ifso, use the manual focus mode to adjust the focus. (-_ 50)105LSQT1337