Panasonic Palmcoder SDR-H40PC Operating Instructions Manual

Contents

'CHECK THE LENSOVER." is displayed.!ound is not played back _rom the built-in speakerf this unit. 1FAlthough this unit iscorrectly connected to aTV, playback imagescannot be seen.The playback images aresqueezed horizontally.JfScenes or files cannot bedeleted or edited.JThe images on the SDcard do not look normal.JEven if HDD or an SDcard is formatted, itcannot be used.fThe indicationdisappears.The screen is frozen.No operation can beperformed.J• Open the lens cover before turning the unit on.• This message may appear if you try to record in extremelydark places.• During playback, move the volume lever to display thevolume indication and adjust it. (4 55)• Please read the operating instructions of your TV andselect the video input that this unit is connected to.• Change the setting to match the aspect ratio of the TV.(4 72)• Locked scenes or files cannot be deleted. Release the locksetting. (4 61,671• It may not be possible to delete scenes that are displayedas [['t_] 1on the thumbnail display. If the scenes areunnecessary, format the HDD or the SD card to erase thedata (4 71) Please be aware that if the HDD or the SDcara is formatted then all the data recorded on the HDD orthe SD card wil be erased.• If the SD card's write protect switch is set to LOCK. thendeletion and editing are disabled (4 23)• The data may be destroyed. It may have been destroyed bystatic or electromagnetic waves. Store important data on aPC or other products as well.• Either this unit or the SD card may be damaged. Pleasecontact consumer support (4 122, 123).• Use an SD card from 8 MB to 8 GB with this unit (4 22)• No operation can be performed on this unit when it isconnected to a PC.• Turn off the power to this unit. If the power cannot be turnedoff. remove the SD card then press the RESET button, orremove the battery or AC adaptor and then reinsert it. Turnon the power again. If normal operation is still not restored.detach the power connected, and contact consumersupport (4 122, 123).106LSQT1337