Panasonic Palmcorder MultiCam PV-GS65 Operating Instructions Manual

Also see for PV-GS65: Operating instructions

Contents

Panasonic Palmcorder MultiCam PV-GS65 Operating Instructions Manual Manual pdf 29 page image

Record mode29LSQT0860Quick startThis Camcorder will be put into standby inapprox. 1.7 seconds after the power is turned on.≥This is only activated in the following cases.≥A tape or a card is inserted, while the TapeRecording Mode is set.≥A card is inserted, while the Card RecordingMode is set.1 Press the [QUICK START] button.≥The quick start recording lamp lights up.(Press the button again to cancel it.)2 Set the [OFF/ON] switch to [OFF].≥The quick start is now ready.3 Set the [OFF/ON] switch to [ON].≥This Camcorder will be put into a recordingpause in approx. 1.7 seconds after it is turnedon.ª To cancel the quick start when thepower is [OFF]Press and hold the [QUICK START] button forapprox. 2 seconds. The lamp will go off and theCamcorder will be completely turned off.≥If the standby continues for approx. 30 minutes,then the lamp will go off and the Camcorder willbe completely turned off.≥When you rotate the mode dial or remove thebattery, the quick start recording lamp is turnedoff and the quick start mode is canceled. If theCamcorder is turned on and the Tape/CardRecording Mode is set though, the lamp turnson and the quick start mode is restored.≥When the Camcorder is quick-started with thewhite balance on automatic, it may take sometime until the white balance is adjusted if thescene being recorded has a light sourcedifferent from the scene last recorded. (Whenthe MagicPix function is used, however, thewhite balance of the scene last recorded isretained.)≥The zoom magnification differs from when it is inthe quick start standby mode and when therecording starts.≥Since about half the power of normal recordingis used in quick start standby, using quick startreduces the time during which pictures can berecorded.Backlight compensation functionThis protects a backlit subject from beingdarkened.≥Set to Tape/Card Recording Mode.1 Press the joystick until the icon 1 appears.2 Move the joystick right to select thebacklight compensation icon [ ].≥The image on the screen will becomebrighter.ª To return to normal recordingSelect the [ ] icon again.≥If you operate the [OFF/ON] switch or the modedial, the backlight compensation is canceled.STARTQUICKOFF ONª 1