Panasonic Palmcorder MultiCam PV-GS65 Operating Instructions Manual

Also see for PV-GS65: Operating instructions

Contents

Panasonic Palmcorder MultiCam PV-GS65 Operating Instructions Manual Manual pdf 54 page image

Others54LSQT0860Warning/alarm indicationsIf any one of the following indications lights up orflashes, please check the Camcorder.Confirmatory indicationsY: A cassette with the accidental erasureprevention slider placed in the [SAVE]position is inserted.No cassette is inserted.[--]/0:The built-in battery is low. -20-°: The warning/alarm indication appears whenyou record yourself. Turn the LCD monitortowards the viewfinder and check thewarning/alarm indication.: No card is inserted.REMOTE :An incorrect remote control mode has beenselected. -23-2END:The tape came to the end during recording.:: The video heads are dirty. -60-Textual indications3DEW DETECT/3EJECT TAPE:Condensation has occurred. Take out thecassette and wait for a while. It takes sometime until the cassette holder opens, but thisis not a malfunction. -59-LOW BATTERY:The battery is low. Recharge it. -14-NO TAPE :No tape is inserted. -15-TAPE END:The tape came to the end during recording.CHECK REC TAB:You are attempting to record pictures on atape with the accidental erasure preventionslider placed in the [SAVE] position.You are attempting audio dubbing or digitaldubbing on a tape with the accidentalerasure prevention slider placed in the[SAVE] position.CHECK REMOTE MODE:An incorrect remote control mode has beenselected. This is only displayed at the firstoperation of the remote control afterpowering-on. -23-WRONG TAPE FORMAT:You are attempting to play back a tapesection that has been recorded with adifferent TV system. This cassette isincompatible.UNPLAYABLE CARD:You are attempting to play back data notcompatible with this Camcorder.UNABLE TO A.DUB (LP RECORDED):Audio dubbing cannot be performedbecause the original recording was in LPmode.UNABLE TO A.DUB:You are attempting to perform audiodubbing on a non-recorded tape.COPY PROTECTED:Images cannot be recorded correctlybecause the medium is protected by a copyguard.CARD ERROR:This card is not compatible with thisCamcorder.You are attempting to format a failed card.It displays, when you attempt to insert anincompatible card to Card Slot.NO CARD:No card is inserted.CARD FULL:Card does not have sufficient memoryremaining.Select Picture Playback Mode and deleteunnecessary files.NO DATA:There are no recorded files on the card.FILE LOCKED:You are attempting to erase protected files.CARD LOCKED:The write protection switch on the SDMemory Card is set to [LOCK].NEED HEAD CLEANING:The video heads are dirty. -60-PUSH THE RESET SWITCH:An irregularity in the equipment has beendetected. Press the [RESET] button (-11-).This may solve the problem.CHANGE MODE TO USE USB:The USB cable is connected to theCamcorder in Card Recording Mode.DISCONNECT USB CABLE:You are attempting to turn the mode dial inPC mode with the USB cable connected tothe Camcorder. You are attempting torecord pictures on a tape/card with the USBcable connected to the Camcorder.NO INK IN PRINTER:There is no ink. Check the connectedprinter.NO PAPER IN PRINTER:There is no paper. Check the connectedprinter.PRINTER ERROR:Check the connected printer.