Panasonic Palmcorder PV-GS320 Operating Instructions Manual

Also see for Palmcorder PV-GS320: Brochure & specs Operating instructions

Contents

Panasonic Palmcorder PV-GS320 Operating Instructions Manual Manual pdf 15 page image

Before using15LSQT1091Power supplyªCharging the batteryWhen this product is purchased, the battery is notcharged. Charge the battery before using thisproduct.≥Battery charging time. (-16-)≥We recommend using Panasonic batteries.(-12-, -79-)≥If you use other batteries, we cannot guaranteethe quality of this product.≥If the DC cable is connected to the AC adaptor,then the battery will not get charged. Removethe DC cable from the AC adaptor.1 Connect the AC cable to the AC adaptor andthe AC jack.2 Put the battery on the battery mount byaligning the mark and then securely plug itin.ªCharging lampLights up:ChargingGoes off: Charging completedFlashing: The battery is over discharged(discharged excessively). In a while,the lamp will light up and normalcharging will start.When the battery temperature isexcessively high or low, the [CHARGE]lamp flashes and the charging time willbe longer than normal.ªConnecting to the AC outlet1 Connect the AC cable to the AC adaptor andthe AC jack.2 Connect the DC cable to the AC adaptor.3 Connect the DC cable to this product.≥The output plug of the AC cable is notcompletely connected to the AC adaptor jack.As shown in 1, there is a gap.≥Do not use the power cord for otherequipment since the power cord is exclusivelydesigned for this Camcorder. Do not use thepower cord from other equipment for thisCamcorder.ªAttaching the batteryPush the battery against the battery holder andslide it until it clicks.ªRemoving the batteryWhile sliding the [BATTERY] lever, slide thebattery to remove it.CAUTIONDanger of explosion if battery is incorrectlyreplaced. Replace only with the same orequivalent type recommended by themanufacturer. Dispose of used batteriesaccording to the manufacturer’s instructions.1BATTERY