Panasonic Palmcorder PV-GS320 Operating Instructions Manual

Also see for Palmcorder PV-GS320: Brochure & specs Operating instructions

Contents

Panasonic Palmcorder PV-GS320 Operating Instructions Manual Manual pdf 44 page image

Playback mode44LSQT1091Playback on TVImages recorded by this Camcorder can beplayed back on a TV.≥Insert a recorded tape or card into thisCamcorder.≥Be sure that the power of the unit is turned offbefore connecting it to a TV1 Connect the Camcorder and a TV.≥Connect the Camcorder and a TV by usingthe Multi cable 1.≥If the TV has an S-Video terminal, then alsoconnect to this terminal 2. It allows you toenjoy more beautiful images. (Do not forget toalso connect to the Video and Audioterminals.)2 Turn on this Camcorder and set the modedial to the Tape Playback Mode (or CardPlayback Mode).3 Select the input channel on the TV.≥If the images are not played back correctly onthe TV (e.g. they are displayed vertically),perform the menu operations in accordancewith the aspect ratio of the TV monitor.Set [SETUP] >> [TV ASPECT] >> [16:9] or[4:3].4 Move the joystick up to select the [1/;]icon to start playback.≥The image and audio are output on the TV.5 Move the joystick down to select the [∫]icon to stop playback.≥Whenever plugging in the S-Video terminal,plug in the VIDEO IN terminal and AUDIO INterminal, too.≥Use the AC adaptor to free you from worryingabout the battery running down.ªIf the image or audio from thisCamcorder is not output on the TV≥Check that the plugs are inserted as far as theygo.≥Check the [12bit AUDIO] settings. (-50-)≥Check the connected terminal.≥Check the TV’s input setting (input switch).(For more information, please read theoperating instructions for the TV.)ªTo display the on-screen informationon the TVThe information displayed on the LCD monitor orthe viewfinder (operation icon, time code andmode indication, etc.) can be displayed on theTV.(This operation is only available when usingthe remote control.)1 Press the [EXT DISPLAY] button on theremote control.≥Press the button again to erase theinformation.Playing back card≥Set to Card Playback Mode.(An operation icon automatically appears onthe LCD monitor.)1 Operate with joystick.E: Plays back the previous pictureD: Plays back the next picture1/∫: Slide show (Plays back the still pictures onthe card in order) start/pause≥The power will not turn off when the LCDmonitor and the viewfinder are closed andretracted during Card playback mode.≥Even if the operation icon does not appear, theprevious or next picture can be displayed.≥While the data on a card are played back, donot operate the mode dial.≥When the access lamp is lit, do not remove thecard.≥Depending on the picture size, it may take timeto display the file.≥If you attempt to play back file recorded in adifferent format or file data is defective, thewhole display becomes bluish and theA/VA/V12[VIDEO IN][AUDIO IN] [S-VIDEO IN]