Panasonic Palmcorder PV-GS320 Operating Instructions Manual

Also see for Palmcorder PV-GS320: Brochure & specs Operating instructions

Contents

Panasonic Palmcorder PV-GS320 Operating Instructions Manual Manual pdf 39 page image

Record mode39LSQT1091ª To cancel the scene mode functionSet [BASIC] >> [SCENE MODE] >> [OFF] or setthe [AUTO/MANUAL/FOCUS] switch to [AUTO].Sports mode≥This mode reduces Camcorder shakes forslow-motion playback or playback pause ofrecorded pictures.≥During normal playback, the imagemovement may not look smooth.≥Avoid recording under fluorescent light,mercury light or sodium light because thecolor and brightness of the playback imagemay change.≥If you record a subject illuminated with stronglight or a highly reflective subject, verticallines of light may appear.≥If the brightness is insufficient, the sportsmode does not function. The [5] indicationflashes.≥If this mode is used indoors, the screen mayflicker.Portrait mode≥If this mode is used indoors, the screen mayflicker. If so, change the scene mode settingto [OFF].Low light mode≥Extremely dark scenes may not be able to berecorded finely.Spotlight mode≥If the recording subject is extremely bright,the recorded image may become whitish andthe periphery of the recorded imageextremely dark.Surf & snow mode≥If the recording subject is extremely bright,the recorded image may become whitish.Recording in natural colors(White balance)The automatic white balance function may notreproduce natural colors depending on thescenes or lighting conditions. If so, you can adjustthe white balance manually.≥Set to Tape/Card Recording Mode.1 Set the [AUTO/MANUAL/FOCUS] switch to[MANUAL].2 Move the joystick up to select the whitebalance icon [ ].3 Move the joystick left or right in order toselect the white balance mode.1) Auto white balance adjustment [ ]2) Indoor mode (for recording underincandescent lamps) [ ]3) Outdoor mode [ ]4) Manual adjustment mode [ ]ª To restore to the automaticadjustmentMove the joystick left or right until the [ ]indication appears. Or, set the [AUTO/MANUAL/FOCUS] switch to [AUTO].≥When the Camcorder is turned on with the lenscap attached, the automatic white balanceadjustment may not function properly. Please turnthe Camcorder on after removing the lens cap.≥When setting both the white balance and theiris/gain, set the white balance first.≥Whenever recording conditions change, re-setthe white balance for correct adjustment.MNL1 111 AWB3)1) 2)4)AWBAWB