a a a ohare eaeEdit-Recording fromCompactDiscsUp to 36 tracks can be edit-recorded.Use of the unit's edit-recording functions safeguard against a breakin the continuity of the sound when the recording changes fromone side of the tape to the other.Aibum edit-recordingIn any of the following edit-recording functions, you can record withdesired tone and effect.See “Changing the Tone Quality” on page 47-51.O STOPThe length of the tape required to accommodate the recording ofall the tracks on the compact disc in their original sequences iscalculated and displayed in advance. The tracks are then recordedin their original sequence.Have you switched on the power?1 Press the input select button marked “CD”.2 Press the disc tray open/close button to loada disc.In this editing mode, compact discs with up to 36 tracks canbe used. (If the compact disc has 37 or more tracks, “ERROR”appears first and then the program edit-recording mode isautomatically established. Program up to 36 tracks in theprogram edit-recording mode, and proceed with the record-ing.)Cée) Press the compact disc edit button.Lh Turn the jog dial to select the “ALBUM”.The “ALBUM’-"PROGRAM’-"FIT" displays will appear insequence.5 Press the setting button.The length of the tape required to record all the tracks appearson the display.Album edit-recording displayDOAOOOOTO8 08> Gormin this case, a C-59 or longer tape is required.6 Load a tape in deck 2.Since, in this case, a tape which is at least 59 minutes long isrequired, insert a C-60 tape.Check that the tape’s erasure prevention tabs are intact andrewind the recording tape, then insert the tape into deck 2.When making a Dolby NR recording, press the Dolby noisereduction button.=Set the reverse mode to7 Turn the jog dial to specify the length of thetape.=)DOOOOOOTORBOABR > GormYour attention is drawn to the fact that recording pre-recordedtapes or discs on other published or broadcast material mayinfringe copyright laws.