27RQT7932Convenient functionsAuto-off functionOnly when disc or tape is selected as the sourceTo save power, the unit turns off if it is left unused for 10 minutes.Press [SHIFT] + [AUTO OFF].“A.OFF” is shown on the display.This function does not work if the source is tuner or AUX.To cancelPress [SHIFT]+[AUTO OFF] again to clear “A.OFF” from the display.For your reference“A.OFF” remains displayed if disc or tape is selected as the source.Dimming the displayUse this when you are going to sleep or any other time you would preferto dim the display panel.Press [SHIFT] + [DIMMER].To return to the original brightness, press [SHIFT]+[DIMMER] again.Muting the volumePress [MUTING].Volume is reduced to minimum.To cancelPress [MUTING] again or reduce the volume to minimum, then raise it tothe required level.Muting also cancels when you switch the unit to standby.The sleep timerThis timer turns the unit off after a set time.While enjoying the desired source:Press [SHIFT] + [SLEEP] to select the time (minutes).Every time you press the button:SLEEP 30 → SLEEP → 60 → SLEEP 90 → SLEEP 120 → SLEEP OFFTo cancel the sleep timerPress [SHIFT]+[SLEEP] to select “SLEEP OFF”.To confirm the remaining timePress [SHIFT]+[SLEEP] once.The remaining time is shown for about 5 seconds.To change the settingPress [SHIFT]+[SLEEP] to select the new setting.You can use the sleep timer in combination with the play/record timer.Make sure the unit is off before the play/record timer’s start time.The sleep timer will be turned off when you start recording from a disc.AUDIO ONLY — To enjoy evenhigher quality soundYou can enjoy higher quality audio by stopping the video output.During playPress [SHIFT] + [A.ONLY].• AUDIO ONLY cancels if you press [SHIFT]+[A.ONLY] again or switchthe unit to standby.• There is output to the screen only when:– the disc is stopped.– performing operations such as searching.– on screen display is displayed.The feature may not work depending on the discs’ recording.Multi Re-master — Enjoying morenatural soundDiscs recorded with multi channels LPCM at 44.1 kHz or 48 kHzThis feature gives you a more natural sound by adding the higherfrequency signals not recorded on the disc.Discs recorded at 44.1 kHz or 48 kHzThis feature reproduces the frequencies lost during recording to give youa sound closer to the original.During playPress [SHIFT]+[M.RE-MASTER].SettingType of music Effect level1 High tempo (e.g., pops and rock) Light2 Various tempos (e.g., jazz) Medium3 Low tempo (e.g., classical) StrongOff Off OffThe actual output sampling frequency depends on the PCM Digital Outputsetting (➡ PCM Digital Output, page 22) when using a digital connection(➡ Home Theater — Enjoying more powerful sound, page 29).➡ Page 11 for the position of the remote control buttons.RAM DVD-V CDDVD-AWMA MP3WMA MP3NoteNoteAUTO OFFNoteRAM DVD-V CDDVD-AConvenient functions