7 RQT7932■ Connecting a television with a VIDEO IN terminalVIDEO OUT terminalDo not connect the unit through a video cassette recorder,because the picture may not be played correctly due to the copyguard.Simple setupStep 2: TelevisionTelevisionSTEP 2Video cable■ Connecting a television with COMPONENT VIDEO INterminalsCOMPONENT VIDEO OUT terminalsThese terminals can be used for either interlace or progressiveoutput and provide a purer picture than the S-VIDEO OUT terminal.Connection using these terminals outputs the color differencesignals (PB/PR) and luminance signal (Y) separately in order toachieve high fidelity in reproducing colors. The description of thecomponent video input terminals depends on the television ormonitor (e.g. Y/PB/PR,Y/B-Y/R-Y, Y/CB/CR). Connect to terminals ofthe same color.• After making this connection, change the black level for a betterpicture (“Video” tab - Black Level Control, ➡ page 21).■ Connecting a television with an S-VIDEO IN terminalS-VIDEO OUT terminalThe S-VIDEO terminal achieves a more vivid picture than theVIDEO OUT terminal by separating the chrominance (C) andluminance (Y) signals. (Actual results depend on the television.)AM ANT FM ANTOPTICALOUTS-VIDEOHAUT-PARLEURSOUTVIDEOOUTAC INSUBWOOFEROUTR LAUXHIGH (6Ω) LOW (6Ω)SPEAKERS (SB-PM91)RLEXT LOOP 75ΩCOMPONENT VIDEO OUTP R P B YYVideo cableAM ANT FM ANTOPTICALOUTHAUT-PARLEURSVIDEOOUTAC INSUBWOOFEROUTR LAUXHIGH (6Ω) LOW (6Ω)SPEAKERS (SB-PM91)RLEXT LOOP 75ΩCOMPONENT VIDEO OUTPR P B YPBS-VIDEO cableAM ANT FM ANTOPTICALOUTS-VIDEOHAUT-PARLEURSOUTVIDEOAC INSUBWOOFEROUTR LAUXHIGH (6Ω) LOW (6Ω)SPEAKERS (SB-PM91)RLEXT LOOP 75ΩCOMPONENT VIDEO OUTP R P B YOUTRVideo cablesTo enjoy progressive video1. Connect to the component video input terminals on a 480Pcompatible television. (Video will not be displayed correctly ifconnected to an incompatible television.)2. Select “480p” for Video Output Mode (Picture Menu, ➡ page 19).• All televisions manufactured by Panasonic and that have 480Pinput connectors are compatible. Consult the manufacturer ifyou have another brand of television.• If the unit is connected to the television through VIDEO OUTor S-VIDEO OUT, output will be interlace, irrespective of thesettings.(included)