53LSQT1190RecordingTo cancel the MagicPix functionSelect [ ] again.≥ The MagicPix function makes the signalcharging time of CCD up to approximately 30klonger than usual, so that dark scenes can berecorded brightly. For this reason, bright dotsthat are usually invisible may be seen, but thisis not a malfunction.≥ If you turn off the power or operate the modedial, the MagicPix function is canceled.≥ If set in a bright place, the screen may becomewhitish for a while.[HDD] [SD]You can record still pictures using the timer.¬ Rotate the mode dial to select .1 Press the joystick. Then movethe joystick down to display theicon shown in the illustration.2 Move the joystick left to select[Ø].3 Press the Photoshot button [ ].After the [Ø] display flashes for approx.10 seconds, a still picture will be recorded.≥ After recording, the self-timer is canceled.≥ If you press the Photoshot button [ ] halfwayand then fully in auto focus mode, the subjectis focused when the button is pressed halfway.(SDR-H200)≥ When you press the Photoshot button [ ]fully in auto focus mode, the subject is focusedjust before recording. (SDR-H200)To stop the timer midway throughPress the MENU button. (The self-timer setting iscanceled.)≥ If you turn off the power, the self-timer standbymode is canceled.≥ Depending on the time taken to bring thesubject into focus, the recording may takelonger than the set time before the picture istaken.[HDD] [SD]You can check if the image is level whilerecording by using the lines displayed on thescreen.¬ Rotate the mode dial to select or.Press the MENU button, then select[BASIC] # [GUIDE LINES] # [ON]and press the joystick.To cancel the Recording guidelinefunctionPress the MENU button, then select [BASIC] #[GUIDE LINES] # [OFF] and press the joystick.≥ The guidelines do not appear on the imagesactually recorded.≥ The guidelines are not displayed while rotatingthe LCD monitor frontward to record yourself.Self-timer recordingThis is for recording shots of yourselfas well.1/21/2 NEXTNEXT1/2 NEXT1/21/2 NEXTNEXT1/2 NEXTRecording guidelinefunctionChecking if the image is level.MENU