72LSQT1190Editing1 Press the button in thethumbnail display.2 Select [ALL] or [SELECT] andpress the joystick.≥ When [ALL] is selected, all files on the mediumexcept the locked files will be erased. Proceedto step 5.3 (Only when [SELECT] is selected in step 2)Select the file to be deleted, thenpress the joystick.The selected file is encircled by a red frame.≥ When the joystick is pressed again, theselected file will be canceled.≥ Up to 50 files can be set in succession.4 (Only when [SELECT] is selected in step 2)Press the button.5 When the confirmation messageappears, select [YES], then pressthe joystick.(Only when [SELECT] is selected in step 2)To continue deleting other filesRepeat steps 3-5.To cancel deleting halfwayPress the MENU button.≥ Files are deleted from the last file on thethumbnail display. The files that have alreadybeen deleted when the deletion is canceledcannot be restored.To complete editingPress the MENU button.∫ Deleting still picture files recorded on anSD card by other productsA still picture file (other than JPEG) that cannotbe played back on this unit may be erased.≥ You can also delete files by pressing theMENU button, selecting [DELETE] and thenselecting [ALL] or [SELECT].≥ In case of [ALL], the deletion may take time ifthere are many files.≥ Do not turn off this unit while deleting.≥ When you delete files, use a battery withsufficient battery power or use the AC adaptor.≥ Do not open the card slot cover while deletingfiles recorded on an SD card. The deletion willstop.≥ If files conforming to DCF standard aredeleted, all the data related to the files will bedeleted.[HDD] [SD]Still picture files can be locked so that they arenot deleted by mistake. (However, please beaware that if a medium is formatted, then all thedata on the medium will be erased.)¬ Rotate the mode dial to select .¬ Select [HDD] or [SD CARD] in [MEDIASELECT].Locking still picture filesThis is for preventing still picture filesfrom being deleted by mistake.