87LSQT1190With a computer1 Connect this unit and acomputer.A USB cable (supplied)≥ Insert the plugs as far as they will go. The unitand computer will not operate properly if theplugs are not inserted fully.≥ Do not use any other USB cables except thesupplied one. (Operation is not guaranteedwith any other USB cables.)The USB function selection screen will appear.2 Select [PC CONNECT] # [HDD]or [SD CARD] and press thejoystick.This unit is automatically recognized by thecomputer.≥ When the unit is connected to a computer,its power cannot be turned off.In this case, disconnect the USB cable (l 88).≥ When a computer is accessing the HDD orcard in this unit, the ACCESS/PC lamp or cardaccess lamp lights. ( or appears onthe LCD monitor.) Do not disconnect the USBcable or AC adaptor while the HDD or card isbeing accessed as it may damage the data.≥ The HDD and card cannot be accessedsimultaneously.≥ It may be necessary to reboot the computerafter connecting this unit to it for the first time.When the unit is connected to a computer, it isrecognized as an external drive.≥ This unit supports only the readout of datausing the computer. The computer cannot writedata to the unit, or erase data from the unit.≥ Depending on the operating environment of thecomputer, the shape of the drive icon and thedrive name (Example: E:) will differ.∫ Drive iconsThe icon is displayed in [My Computer].When accessing the HDD≥ Windows XP:≥ Windows 2000:When accessing the card≥ Windows XP:≥ Windows 2000:∫ Example folder structureHDDAbout the computer displayA