19LSQT1361SetupThe unit is in the standby condition when the ACadaptor is connected. The primary circuit isalways “live” as long as the AC adaptor isconnected to an electrical outlet.1 Connect the AC cable to the ACadaptor and the AC outlet.2 Connect the DC cable to the ACadaptor.3 Connect the DC cable to this unit.≥ Do not use the AC cable with any otherequipment as it is designed only for this unit.Do not use the AC cable from other equipmentwith this unit.≥ While the DC cable is connected to the ACadaptor, the battery will not be charged.≥ When recording, open the lens cover beforeturning the unit on. (l 10) If the unit is turnedon with the lens cover closed, the automaticwhite balance adjustment (l 102) may notfunction properly.Set the OFF/ON switch to ON.The status indicator A lights and the power turnson.≥ When the unit is turned on for the first time, amessage asking you to set the date and timewill appear. Select [YES] and set the date andtime. (l 27)≥ When the unit is turned on for the first time, aselection screen will appear to select therecording destination for motion pictures andstill pictures.Select [HDD] or [SD CARD] for each type ofpicture and then press the joystick.Set the OFF/ON switch to OFF.The status indicator A goes off when the powerturns off.When the OFF/ON switch is set to ON, the powercan be turned on and off with the LCD monitorwhen the unit is in video recording mode orpicture recording mode.Connecting to the AC outletTurning the unit on/offHow to turn on the powerHow to turn off the powerHow to turn the power on and offwith the LCD monitorAA
