43LSQT1361Recording[HDD] [SD]By focusing only on the subject and blurring thebackground, the image can be impressive.The unit can focus on the subject at a distance ofapprox. 50 cm.¬ Rotate the mode dial to select or.1 Press the joystick. Then movethe joystick down to display theicon shown in the illustration.2 Move the joystick right to select[ ].≥ If the magnification is 10k or less, then it isautomatically set to 10k.To cancel the tele macro functionSelect [ ] again.≥ If a sharper focus cannot be achieved, adjustthe focus manually. (l 47)≥ In the following cases, the tele macro functionis cancelled.jThe zoom magnification becomes lower than10k.jThe power is turned off or the mode dial isoperated.[HDD] [SD]This function allows you to record colour subjectsin dark locations to stand out against thebackground.Attach this unit to a tripod, and you can recordimages free from vibration.≥ Minimum required illumination: approx. 1 lx≥ Recorded scene is seen as if frames weremissed.¬ Rotate the mode dial to select .1 Press the joystick. Then movethe joystick down to display theicon shown in the illustration.2 Move the joystick up to select[ ].≥ If it is difficult to focus, adjust the focusmanually. (l 47)To cancel the colour night view functionSelect [ ] again.≥ The colour night view function makes thesignal charging time of CCD up toapproximately 25k longer than usual, so thatdark scenes can be recorded brightly. For thisreason, bright dots that are usually invisiblemay be seen, but this is not a malfunction.Tele macro functionThis is for bringing only what youwant to record into focus to takeclose-ups.2/22/2 NEXTNEXT2/2 NEXT2/22/2 NEXTNEXT2/2 NEXTColour night view functionThis allows recording in darklocations.2/22/2 NEXTNEXT2/2 NEXT2/22/2 NEXTNEXT2/2 NEXT
