68VQT1P61EditingYou can write the data of the still picturesto be printed and the number of prints(DPOF data) onto the SD card.¬ Rotate the mode dial to select.1 Press the MENU button, thenselect [PHOTO SETUP] #[DPOF SET] # [SET] and thenpress the cursor button in thecentre.2 Select the file to be set, thenpress the cursor button in thecentre.The number of prints set to be inDPOF is displayed.3 Press the cursor button up ordown to select the number ofprints, then press the cursorbutton in the centre.≥ You can select from 0 to 999. (Theselected number of pictures canbe printed with the printersupporting DPOF.)≥ To cancel the setting, set thenumber of prints to [0].≥ You can also select multiple files insuccession.To complete the settingsPress the MENU button.To cancel all DPOF settingsPress the MENU button, then select[PHOTO SETUP] # [DPOF SET] #[CANCEL ALL] and then press thecursor button in the centre.≥ When the confirmation messageappears, select [YES], then press thecursor button in the centre.∫ What is DPOF?DPOF stands for Digital Print OrderFormat. This enables picture printinginformation to be written onto an SD cardso that it can be used on a systemsupporting DPOF.≥ The DPOF setting can be establishedfor up to 999 files.≥ DPOF setting made on other devicesmay not be recognised by this unit.Please perform the DPOF settings onthis unit.≥ You cannot add the recording date topictures to be printed with the DPOFsettings.DPOF settingThis is for writing the printingdata on an SD card.
