With a computer80VQT1P61≥ A CD-ROM drive is necessary to install the supplied software.≥ When 2 or more USB devices are connected to a personal computer, or whendevices are connected through USB hubs or by using extension cables, properoperation is not guaranteed.≥ Use the supplied USB cable when connecting to the personal computer. (Operationis not guaranteed with any other USB cables.)≥ Even if the system requirements mentioned in these operating instructions arefulfilled, some personal computers cannot be used.≥ This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows98/98SE, Windows Me and Windows NT.≥ Operation on an upgraded OS is not guaranteed.≥ Operation on an OS other than the one pre-installed is not guaranteed.∫ MotionSD STUDIO 1.3EOperating environmentPersonalcomputerIBM PC/AT compatible personal computerOS Microsoft Windows 2000 Professional Service Pack 4Microsoft Windows XP Home Edition Service Pack 2Microsoft Windows XP Professional Service Pack 2Microsoft Windows Vista Home PremiumMicrosoft Windows Vista Home BasicCPU Intel Pentium III 800 MHz or higher(including compatible CPUs.Intel Pentium 4 1.6 GHz or higher recommended)RAM Windows 2000/Windows XP:256 MB or more (512 MB or more recommended)Windows Vista:512 MB or more (1 GB or more recommended)Display High colour (16 bit) or more (32 bit recommended)Desktop resolution of 1024k768 pixels or more (1280k1024pixels or more recommended)Graphics card complying with DirectX 9.0b or 9.0c, andDirectDraw overlayFree hard diskspaceUltra DMA—33 or more (100 or more is recommended)640 MB or more (When writing to DVD, the same amount of freespace as the disc is necessary.)
