20RQT6091Listening to CDsIt is possible to select your own program (order of tracks beingplayed) using the program playback mode. Any of the tracks (1-99)on the CDs in the trays of the 3-CD changer can be selected.If you want to program and record tracks, see “Program EditRecording” on page 30.1 Load CDs into the trays of the 3-CD changer.• Only tracks on the CDs loaded in the 3-CD changer can be reg-istered into the program.Note• To close a tray, press the 0 button for the tray number that isopen. If you press the 0 button for a tray number other than thatfor the tray that is open, the program may not be played correctly.2 Press the PLAY MODE button when the unit isin the CD stop mode.• The CD PLAYER indicator is shown in the display window,PROGRAM indicator is shown in the display window, and if noprogram has been registered, “PG NO PROGRAM” is shown inthe information display.3 Press the SET button to start programregistration.• The information display will show the following, and discsource columns will flash.4 Select the disc source (CD tray) by turning theMULTI JOG control, and then press the SET but-ton.• When the SET button is pressed, next the programming step andtrack number columns will flash.5 Select and enter a track number (1-99) byturning the MULTI JOG control, and then pressthe SET button.• The following is an example of track 2 on the CD in tray DISC1being entered as Step 01.• When the SET button is pressed, the programming of Step 01 isregistered, and programming for Step 02 is ready.6 Repeat steps 4 and 5 to program up to amaximum of 32 steps.• If you try to program over 32 steps, “MEMORY FULL” isshown in the information display, and the programming func-tion ends automatically.• Pressing the CD Control STOP s button on the main unit endsthe programming function.Programming Playback UsingMain Unit ControlsMAXMIN PLAY MODEPHONESOPEN /CLOSEREC SELECTORMIX BALANCEMULTI JOGREC LEVEL+–CANCELSETMENUREC/REC MUTESYNCHROCD EDIT CD RECFINALIZELINECDDIGITALCOMPACT DISC RECORDER SL-PR300DISC 1DISC 2DISC 3OPEN /CLOSEDISCSELECTOR321LINE CD2 7 3,4,51 4,5Program stepnumber Disc sourceTrack numberProgrammingstep number Disc sourceTrack numberMULTI JOGREC LEVEL+– SETCD1 CD2 CD31. Select the disc. 2. Enter the selection.MULTI JOGREC LEVEL+– SET1. Select the track. 2. Enter the selection.SL-PR300EB.fm Page 20 Thursday, September 20, 2001 3:42 PM