Panasonic SL-PR300 Operating Instructions Manual

Also see for SLPR300 - CD RECORDER: Operating instructions Service manual

Contents

Panasonic SL-PR300 Operating Instructions Manual Manual pdf 33 page image

English33RQT6091Recording onto CD-R/RW Discs4 Turn the MULTI JOG control or press the P/p(menu) button on the remote control andchoose the setting “TR SPACE ON” or “TRSPACE OFF”.• Press the CANCEL button (main unit/remote control) to cancelthe procedure and return to the normal display.5 Press the SET button.Notes• There is no indicator to show the status of this function.• This function will work when you begin recording from therecording pause mode except when performing synchronizedone-button recording.This unit offers the ability to record from various external sourcesto the CDR using synchronized START and START&STOP func-tions. This feature is applicable to external digital audio equipmentconnected via the DIGITAL IN OPTICAL and COAXIAL termi-nals and the LINE IN (REC) terminal.• Synchronized recording to the CDR from an externalsource.1 Load a recordable CD-R or CD-RW disc in theCDR tray.• The disc is read if required.2 Press the REC SELECTOR button on the mainunit or on the remote control repeatedly toselect the recording source.• Each press of the selection button on either the main unit orremote control, toggles one step through the following sourcechoices.OPTICAL IN: Record digital signals via the OPTI-CAL terminal.COAXIAL IN: Record via the COAXIAL terminal.CD DIGITAL: Record digital signals from 3-CDchanger.CD ANALOG: Record analog signals from 3-CDchanger.LINE IN: Record via the LINE IN terminal.CD+LINE MIX: Record via 3-CD changer and LINEmix.3 Press the SYNCHRO button (main unit/remotecontrol).• The CDR is put into the synchronized recording pause mode.• The source device must be stopped at this time.4 Start playing of the source unitNotes• When recording with the SYNCHRO button, recording startswhen the input level is detected. If the track starts very quietly(with a low input level), the beginning of the track may not berecorded. When recording from an analog source, such as recordsor tapes, recording may not start if the recording level is too low.When this occurs, please perform manual recording.Performing synchronized recording of a digital source• Recording is started based on the digital signal.• Track marking is based on track information recorded in thedigital signal. For digital sources other than CD, MD and DAT,track marking is based on silent track space.Performing synchronized recording of an analog source• Recording is started when the unit detects an audio signal.• Track marking is based on silent track space which the unitinterprets to be track breaks. If automatic track marking hasbeen turned off, manual track marking is necessary during therecording process.To stop recording at any timePress the CDR Control STOP s button on the main unit or the s(stop) button on the remote control.Synchronized Recording fromExternal SourcesMAXMIN PLAY MODEPHONESOPEN /CLOSEREC SELECTORMIX BALANCEMULTI JOGREC LEVEL+–CANCELSETMENUREC/REC MUTESYNCHROCD EDIT CD RECFINALIZELINECDDIGITALCOMPACT DISC RECORDER SL-PR300DISC 1DISC 2DISC 3OPEN /CLOSEDISCSELECTOR321LINE CD312CD1 CD2 CD3CD RECPLAYMODE•RECREC MUTERECSELECTORMENUPITCH0CANCELREPEAT CDPITCH +SETPITCH–COMPACT DISC RECORDERRAK-PR300CD-R/RWCD EDIT FINALIZE DISPLAY1 24 57 83690 10FADE SYNCHRODISC SELECTOR_>CONTROL32ssSL-PR300EB.fm Page 33 Thursday, September 20, 2001 3:42 PM