Panasonic TH-152UX1 Operating Instructions Manual

Also see for TH-152UX1C: Service manual

Contents

44Pressing the FUNCTION button activates one of the following ve functions. The settings offunctions are performed with the “Function button assign 1” to “Function button assign 4” onthe Options menu. (see page 43)3D Settings / SignalThe menu screen is displayed.(Example: 3D Settings)Safety Precautions3D Settings3D Picture Format3D Picture Sequence3D Picture Display 3DAutoOffPressing the FUNCTION button clears the menu.Scrolling bar / Test patterns / Blue onlyConrmation screen (Example: Scrolling bar)The operationstarts.Scrolling barActivates the “Scrolling bar only” screensaver. After15 minutes, the display enters standby mode.To exit this mode, press any button.Blue onlyThe screen displays only blue color for imageadjustment.To exit this mode, press FUNCTION button.Test patternsEach time you press , a different test pattern isdisplayed (seven in all).Color Bars Red GreenBlueFrame(2 lines × 2 dots)Black 1% windowTo exit this mode, press any button other than .Note:“PC Power management” and “Auto power off” are deactivated during “Scrolling bar” or “Test patterns” operation.(see page 34)Item Adjustments3D Safety Precautions3D Safety Precautions show/hide is set during power ON.On: 3D Safety Precaution is shown every time when the power is ON.Off: 3D Safety Precaution is not shown when the power is ON.When the setting changes from “On” to “Off”, the conrmation screen is displayed as below.Pressing “YES” switches the setting.YES NO3D Safety PrecautionsIf Off is selected, the 3D safety precautionswill not be displayed when power is turned on.Change Setting?Using FUNCTION buttonOptions AdjustmentsYes NoScrolling barFunction 1 Press toselect“Yes”.Press.NormalizationWhen both main unit buttons and remote control are disabled due to the “Button lock” or “Remocon User level”adjustments, set all the values “Off” so that all the buttons are enabled again.Press the button on main unit together with button on the remote control and hold for more than 5 seconds.The “Shipping” menu is displayed and the lock is released when it disappears.