10Q-LinkQuick start Guide4. Q-Link connection of Plasma TV, VCR/DVD recorder and Satellite Receiver using Scartand RF cables For Q-Link to function correctly this set, VCR andSatellite Receiver must be connected as shown inthe diagram below.RF connections• Connect an RF cable to the Antenna Input terminalof the Satellite Receiver.• Connect an RF cable from the Antenna Outputterminal of the Satellite Receiver to the AntennaInput terminal of the VCR.• Connect an RF cable from the Antenna Outputterminal of the VCR to this set Antenna Inputterminal ( ).Scart connections‘Fully wired’ Scart Cables should be used for all ofthe Scart connections.• The AV2 Scart socket of the VCR must beconnected to the VCR Scart socket of the SatelliteReceiver.• The TV Scart socket of the Satellite Receiver mustbe connected to the AV1 Scart socket of this set.Note:If using a ‘Q-Link’ VCR then the AV1 Scart socketof the VCR must be connected to the AV2/AV4 Scartsocket of this set. If your VCR is not a ‘Q-Link’ VCR,please consult your VCR operating instruction book.Notes:• Additional equipment and cables are not supplied.• Further details of audio/ video connections canbe found on pages 44 and 45.RRGBVIDEOS VIDEO VIDEO S VIDEOLPRPBYAUDIO OUTAV 4CAV4 AV2 AV1COMPONENTVIDEOVIDEO RGBANTENNAPlasma TVAntenna LeadAntennaOutput terminalAntennaInputterminalAntennaInput terminalAntenna InputterminalSatelliteReceiverTVScartsocketVCRScartsocketAV2ScartsocketAV1ScartsocketAntenna OutputterminalAV1Scart socketAV2/AV4Scart socketVCR/DVDrecorderQ-Link allows the television to communicate with a compatible VCR or DVD Recorder.ForQ-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”,“DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2socket of the television and the appropriate socket on your VCR, and the AV4 socket of the television and the appropriatesocket on your DVD Recorder.For connection to the appropriate Scart socket on the recording device, refer to the device’s operating instructionbook.