Panasonic TH-42PA20 Operating Instructions Manual

Also see for Viera TH-37PA20: Operating instructions Operating instructions Operating instructions Manual de instrucciones Operating instructions

22The Colour system will change as shown.(When in TV mode)Note:• PAL and SECAM are different colour signal broadcast transmission systems applicable to differing countries.• M.NTSC is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PALtelevision equipment.• During RGB input signal in AV1, AV4 mode, PAL and SECAM are not available.• During RGB input signal in AV1, AV2, and during component input signal in AV4C, this function is not available.Tuning menuColour System Selection (Different region use differing systems)If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received.1 Press to select the Colour System.2 Press to produce the optimumimage.N1 2 34 5 67 8 90CAuto M.NTSCSECAMPALAutoM.NTSCNTSCPAL SECAMDecoder (AV2)Volume correc.Programme editAuto setupManual tuningFine tuningColour systemTuning menuAutoOffTV/AVSTR TV/AV(When in AV mode)3 (When in TV mode)Press to store the selected ColourSystem.Press to exit from the ColourSystem.This returns the set to the normalviewing condition.Press to exit from the ColourSystem.This returns the set to the normalviewing condition.The selected Colour System isautomatically memorised.3 (When in AV mode)Volume correctionControl the gain of the received signal, which can differ between stations.Lets you adjust the volume level of individual station. Use this feature if the volume level varies significantlybetween stations. Adjusting one station’s volume to bring it into line with the other stations means you can avoidhaving to adjust the volume each time you change channels.1 Press to select the Volume correc. on tuning menuscreen.2 Press to adjust the Volume level.3 Press to store.STRDecoder (AV2)Volume correc.Programme editAuto setupManual tuningFine tuningColour systemTuning menuAutoOff