11Quick start GuidePreset DownloadThis allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correctrecordings are made; there are several ways to perform this operation :1. During installation as explained in the ’Quick Start Guide’ beginning on page 8.2. When Auto setup is started from within the Tuning menu, see page 18.3. Preset download started from the recording device, refer to the device’s operating instruction book.Important Note:Not all recording devices support this type of data communication system. Some may support certain features, but notothers. Refer to the recording device’s operating instruction book.If Q-Link is inoperative, first confirm that your Scart cable is a “fully wired” type. Ask your dealer for further details.What You See Is What You Record (DIRECT TV RECORDING)This will allow the immediate recording of the programme currently shown on the television, bythe recording device attached to the Scart socket, which can be chosen using “Q-Link”. (seepage 24).Press the DIRECT TV REC button on the remote control.If the recording device is in Standby mode with usable recording media inserted, it willautomatically switch on when you press the DIRECT TV REC button.If a “Q-Link” device is connected, a message will appear on the TV screen showing what isbeing recorded, or if it is not possible to record. Some “Q-Link” compatible devices will onlydisplay the message when on the VCR programme position(0) or in AV mode. Refer to thedevice’s operating instruction book.When using a “NEXTVIEWLINK” device the main features possible are the following :No recording -Check tape or discRecording in progressThe recording device is recording the programme signalfrom its own tuner. If you wish you can switch off the TVand leave the device recording in the normal way.The tape or disc may have been “write protected”, missingor may be damaged. The device may already be recording.Refer to the device’s operating instruction book.Additionally, when using a “Q-Link” device themain features possible are the following :The following features are only available from the device connected to the scart socket selected using “Q-Link”. (seepage 19).TV / Recording device Auto Power OnIf you insert pre-recorded media into the recording device and press the Play button whilst the TV is in ’Standby’ mode,the TV will automatically switch on and select the correct AV input so that you can view the content.Recording device Auto Power StandbyWhenthe TV is switched into ’Standby’ mode, the recording device will also switch into ’Standby’ modeif there is nomedia inserted, or if there is media inserted and the device is in ’Rewind’ or ’Stop’ mode. If aVCR is rewinding a tape,it will not switch into ’Standby’mode until rewinding has finished.Recording device Image View OnIf the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g. Mainmenu), the TV will automatically switch On and the menu will be displayed.Some other devices may support this feature. Refer to the device’s operating instruction book.Important Note:These recording devices may support some or all of the above functions. Refer to the device’s operating instructionbook.Not all recording devices support this type of data communication system. Somemay support certain features, but notothers. Refer to the device’s operating instruction book.Some features are only available from the device connected tothe scart socket selected using “Q-Link“. (see page 24 ).If Q-Link is inoperative, first confirm that your Scart cable is a “fully wired” type. Ask your dealer for further details.This TV will also communicate with other recording device’s that bear the following logos :• “DATA LOGIC” (a trademark of Metz Corporation)• “Easy Link” (a trademark of Philips Corporation)• “Megalogic” (a trademark of Grundig Corporation)• “SMARTLINK” (a trademark of Sony Corporation)TV/AV1 2 34 5 6F.P. INDEX HOLDPICTURESOUNDSET UPTV/TEXTDIRECTTV REC CH SEACH STILL