Panasonic TH-42PV500A Operating Instructions Manual

Also see for TH-42PV500A: Service manual

AV2 / 4 INYMONOMONITOROUTAV1 INCOMPONENT VIDEO COMPONENTS VIDEOMONO MONO MONOVIDEOYLRAUDIOYP B/CBP R/C RP B/CBP R /CRLRAUDIOAV2 IN AV4 INAV INLRAUDIOINVIDEOOUTAUDIOOUTY, PB, PR ,OUTPRPBYLRCOMPONENT VIDEO OUTPB /C BPR /C RMONITOROUTAV1 INCOMPONENT VIDEO COMPONENTS VIDEOMONO MONO MONOVIDEOYLRAUDIOYP B/CBP R /C RPB /C BPR /CRLRAUDIOAV2 IN AV4 INLRAUDIOINAV INHDMIOUTHDMI IN11Note:Component input terminals accept progressive or non-progressive signals format, as well as high definition 720p(50Hz),720p(60Hz), 1080i(50Hz) and 1080i(60Hz).How to connect the AV2 / AV4 Component Input terminalsExample of input signal source Connect the VIDEO or COMPONENTVIDEO terminal.DVD PLAYERDigital TV-SET-TOP-BOX(DTV-STB)ConnectionsHDMI (High Definition Multi media Interface) is the first all-digital consumer electronics A/V interface that supportsuncompressed standard. The HDMI terminal supports both video and audio information.An HDMI-compliant device∗1, such as a Set Top Box or DVD player with HDMI or DVI output terminal can be connectedto the HDMI input terminal.• If the external device has DVI output only, use a DVI to HDMI adapter cable∗2 to connect to the HDMI terminal.• Connect the audio cables to the AUDIO IN terminals when using a DVI to HDMI adapter cable.• Select the audio setting in HDMI input. See page 20.Notes:• This input terminal is not intended for use with computers.• 720p/1080i signals will be re-formatted to view on your display.• If the external devices have the aspect adjustment, set to 16:9.• For applicable HDMI signals information see page 41.How to connect the HDMI Input terminalCompatible sampling frequency of AUDIO signal through HDMI (L.PCM) : 48 kHz / 44.1 kHz / 32 kHzNotes:• This HDMI connecter is Type A.• If you connect equipment without a digital output terminal, connect to the COMPONENT, S VIDEO or VIDEO inputterminal on the TV so you can receive an analogue signal.• The HDMI IN terminal can only be used with 480i, 480p, 576i, 576p, 720p or 1080i picture signals. Set the DigitalSet Top Box DIGITAL OUT terminal output setting to 480i, 480p, 576i, 576p, 720p or 1080i. For detailed information,refer to the Digital Set Top Box instruction manual. If you cannot display the picture because your Digital Set TopBox does not have a DIGITAL OUT terminal output setting, use the component input (or the S Video input or Videoinput). In this case the picture will be displayed as an analogue signal.∗1. HDMI-compliant device is that has the HDMI Logo on it.∗2. HDMI-DVI adapter cable: Consult your consumer electronics dealer for availability.DVD PLAYERDigital TV-SET-TOP-BOX(DTV-STB)Example of input signal source