Panasonic TH-42PV500A Operating Instructions Manual

Also see for TH-42PV500A: Service manual

26PC modeMain menuPicture menuSetup menuSound menuPC setup Access to adjust chosen option.Input :resolutionDisplayed during VGA(640 × 480 dots), WVGA(852 × 480 dots), XGA(1,024 × 768 dots),WXGA(1,366 × 768 dots) input signals.Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.Clock : If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to thelowest level.H-pos : Adjust the horizontal position.V-pos : Adjust the vertical position.Clock phase : Eliminate the flickering and distortion.Carry out this adjustment after adjusting Clock.Adjust to reduce noise to the most inconspicuous level.Sync : H & V - To synchronize by the horizontal and vertical signals from your PC.On G - To synchronize by the green signal form your PC (if available).Side panel, Power saveAbout settings, see page 21.H-freq. / V-freq.If the input signal is not applicable, the characters will turn to red.For applicable PC signals information see page 41.ClockInput resolutionH-posV-posClock phaseSync H & VVGAPC setupPC setupSide panelPower saveSetup menuOffOffAccessMENUEXITSetup menuDuring PC modePress the MENU button.Move to choose Setup menu.Access Setup menu.Move to choose menu option.Adjust chosen option or access chosen menu.Press the EXIT button at any time to exit Setup menu.