Panasonic TQBJ0323-1 Operating Instructions Manual

Also see for PT-LB1E: Operating instructions Brochure & specs Operating instructions

PreparationENGLISH  15Details of your projector (continued)PROJECTOR’S REMOTE CONTROLTop and rear viewRemote controlsignal emittersInstalling/removing batteriesPress the tab and lift up thecover.Insert the batteries according to thepolarity diagram indicated inside orremove.Use only manganese batteries.Front viewAUTOSETUPMENU RETURNENTERFREEZEAVMUTECOMPUTER VIDEODEFAULT FUNCTION WIN.INDEX-DIGITAL ZOOM VOLUME①⑤②③④⑥⑦⑫⑪⑩⑧⑨① POWERSwitch between standby mode and projectionmode. ( page 22, 23)② Display the Main menu. ( page 29)③ Navigate through the menus with [] andconfirm the selection with [ENTER]. ( page 28)④ Capture the projected image as a frozen picture.( page 25)⑤ Switch the required input signal button to select.( page 25)⑥ Reset some of the settings to the factory defaultsettings. ( page 26)⑦ Control the zoom size. ( page 27)⑧ Control speaker volume. ( page 26)⑨ Create shortcut assigned to certain selectedfunction. ( page 27, 40)⑩ Display frozen image while the display ofsubsequent images continues. ( page 26)⑪ Turn off the projection temporarily. ( page 25)⑫ Detect the input signal.Adjust the settings of SHIFT, DOT CLOCKand CLOCK PHASE in the POSITION menuautomatically for COMPUTER signals. ( page 25)NOTE:Do not drop the remote control.•Avoid contact with liquids or moisture.•Do not attempt to modify or disassemble the remote control.•Do not let strong light shine onto the signal receptor which will cause a malfunction.•The remote control operates within the range of 7 m (23' 0"), approximately ±30 ° vertically and horizontally from the projector•avoiding any obstacles.The operating range may differ due to the screen material and may not be effective with a translucent screen.•