- 44 -Aspect Control SignalProgrammes usually contain an “Aspect Control Signal”. (Widescreen signal,Control signal through SCART / HDMI terminal)In Auto mode, aspect mode will appear in the top left of the screen if aWidescreen signal (WSS) or a Control signal through SCART (pin8) / HDMIterminal is found. The aspect will switch to the appropriate ratio.Watching > For best picture > Aspect■ Available conditions● Terrestrial / cable terminal (WSS only)Valid input signal format:DVB-CDVB-TPAL B, G, H, I, D, KSECAM B, G, L, L’, D, KInvalid input signal format:PAL 525/60 6.5 MHzPAL 525/60 6.0 MHzPAL 525/60 5.5 MHzM.NTSC 6.5 MHzM.NTSC 6.0 MHzM.NTSC 5.5 MHz● AV1 (SCART) / AV2 (VIDEO) terminalsValid input signal format:PALSECAMPAL 525/60M.NTSCNTSC: Control signal through SCART (pin 8) / HDMI terminal only
