- 71 -3. The confirmation screen is displayed and press OK to start Auto Setup.(Settings are made automatically.)● When the operation is completed, the channel at the lowest position willbe displayed.■ Auto Setup using the buttons on the TV1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds todisplay the menu.2. Set Auto Setup with following control panel buttons.● Move the cursor / select from a range of options / select the menu item(up and down only)● Access the menu / store settings after adjustments have been made oroptions have been set with INPUT/OK/HOLD for MENU buttonManual Tuning● Normally use Auto Setup or Update Channel List to retune DVB channels.● If tuning has not been done completely or for adjusting the direction of theaerial, use this function. (DVB)● All DVB channels found will be added to Channel List.■ DVB-C1. Enter the frequency with Numeric buttons.● Normally set Symbol Rate and Service ID to Auto.2. Select Start scan with / and press OK to search.■ DVB-T1. Select a channel with / and adjust frequency with / for eachchannel.● Set where the level of Signal Quality becomes the maximum.2. Press OK to search.
