- 70 -● To rename the channel name (Analogue)1) Press (blue) to edit.2) Enter characters (maximum 5 characters) with / / / orNumeric buttons, and press OK to set.3) Press BACK/RETURN to store.= Note =● If a VCR is connected only with the RF cable in Analogue, edit VCR.Auto SetupAutomatically retunes the channels received in the area.● This function is available if channel tuning is already performed.● Only the selected mode is retuned. All the previous tuning settings areerased.● If Child Lock PIN number has been set, the PIN number is required.Functions > Child Lock > PIN number● If tuning has not been done completely, set Manual Tuning.Watching > Tuning and editing channels > Manual Tuning■ DVB-C, DVB-T, Analogue1. Select Auto Setup with / and press OK to access.2. Set DVB-C Auto Setup Settings with / / / and press OK to store.(DVB-C)● Scan ModeFull:Scans the whole frequency range.Quick:Scans the suitable frequency in your country.● Normally set Frequency, Symbol Rate and Network ID to Auto. If Autois not displayed or if necessary, enter each value specified by yourcable provider with Numeric buttons.● After settings, select Start scan with / and press OK to search.
