- 73 -Signal ConditionSelects a channel and checks the signal condition.A good Signal Strength is not an indication of suitable signal for DVBreception.● Use the Signal Quality indicator as follows.– Green bar: Good– Yellow bar: Poor– Red bar: Bad (Check the terrestrial aerial or cable.)● Vertical lines show the maximum signal value of the selected channel.● To change the channel● For DVBOther settingsFavourite NetworkSelects your favourite network for each broadcasters (only available in somecountries).● For DVB-C, DVB-TService Replacement(On / Off)Set to On to display a message to switch to the available service (onlyavailable in some countries).● For DVB-CAttenuator(On / Off)Sets the antenna system to use plural LNBs for receiving several satellites.● If the DVB-C signal is too strong, the interference may occur. In this case,set to On to weaken the signal automatically.Add TV SignalAdds the TV mode.● This function is available if you skip any modes to tune in Auto Setup forfirst using the TV.
