Panasonic TX-55MZ800E Operating Instructions Manual

Also see for TX-55MZ800B: Operating instructions

English - 6 -HDR/HLG content, if the HDR/HLG content is receivedthrough an HDMI input. The source device should alsobe at least HDMI 2.0a compatible in this case.Dolby VisionDolby Vision™ delivers a dramatic visual experience,astonishing brightness, exceptional contrast, and vividcolour, that brings entertainment to life. It achieves thisstunning image quality by combining HDR and widecolour gamut imaging technologies. By increasing thebrightness of the original signal and using a higher dy-namic colour and contrast range, Dolby Vision presentsamazing true-to-life images with stunning detail thatother post-processing technologies in the TV aren’table to produce. Dolby Vision is supported via nativeand market applications, HDMI and USB inputs. Whenthe input source is set to the related HDMI input pressthe Menu button and set the HDMI EDID Versionoption in the TV Options>Settings>Channels &Inputs>Inputs menu as EDID 2.0, EDID 2.1 or AutoEDID in order to watch Dolby Vision content, if theDolby Vision content is received through an HDMIinput. The source device should also be at least HDMI2.0a compatible in this case. In the Picture Modemenu three predefined picture modes will be availa-ble if Dolby Vision content is detected: Dolby VisionBright, Dolby Vision Dark and Dolby Vision Vivid.All allow the user to experience the content in the waythe creator originally intended with different ambientlighting conditions. To change the Picture Mode settingpress the Menu button while watching the Dolby Visioncontent and go to Picture menu. While watching DolbyVision Content via an application, except YouTube,Netflix and Multi Media Player, you will not be able toaccess the Picture menu and set the Picture Mode.OLED TV OperationsOLED panels have some procedures in order to extendthe panel lifetime and provide protection from imagesticking problem.OLED Fast Panel Clean• After every 4 hours of use, the TV will perform OLEDFast Panel Clean operation automatically whennext time the TV is switched into standby mode.If the TV is in Store Mode this operation will beperformed 3 hours after the last successful OFF-RScompensation.• It will take about 6 minutes. In order not to interruptthe operation it is recommended to wait until theoperation is completed.• The LED will be blinking during the operation.• When the operation is complete, the TV will switchinto standby mode.• This operation can be interrupted by cutting thepower supply to the TV or switching the TV on. Inthis case OLED Fast Panel Clean operation willperformed when next time the TV is switched intostandby mode.OLED Compensation• This operation will be performed automatically at anytime of the day when the TV is switched into standbymode after every 1500 hours of use.• After a period of 60 seconds in standby mode theTV will switch on with blank screen and OLEDCompensation function will be performed if thepanel is at proper temperature.• This will take about 1 minute and during the operationthe LED will blink and a horizontal line will appearon the screen, moving from the top to the bottomof the screen.• After OLED Compensation operation is completedthe TV will switch into standby mode.• OLED Compensation operation can be interruptedat any time by cutting the power supply to the TV orswitching the TV on.• If OLED Compensation operation is interrupted amassage will appear on the screen stating that theOLED Compensation operation was interruptedwhen next time the TV is switched on. In this caseOLED Compensation operation will be performedwhen next time the TV is switched into standby mode.• This operation can be performed manually using theOLED Compensation option in the Settings>DevicePreferences>Picture>OLED menu. This operationwill take about 90 minutes and then the TV will beswitched off automatically. Do not unplug the mainslead during this period. It is not recommended toperform this operation more than once a year orunless requested by authorised service personnel.Manual OFF-RS Compensation• This operation can be performed manually usingthe Manual OFF-RS Compensation option in theSettings>Display & Sound>Picture>OLED menu.• It will take about 15 minutes. In order not to interruptthe operation it is recommended to wait until theoperation is completed.• The LED will be blinking during the operation.• When the operation is complete, the TV will switchinto standby mode.• This operation can be interrupted by cutting thepower supply to the TV or switching the TV on. Inthis case, OFF-RS operation will be performed thenext time the TV is switched into standby mode after4 hours of use.Pixel Shift• The images will be automatically shifted by one pixelevery 80 seconds to prevent image sticking.