Panasonic TY-ST32PE1 Operating Instructions Manual

Contents

safety precautions

Panasonic TY-ST32PE1 Operating Instructions Manual Manual pdf 8 page image

8 EnglishSafety precautionsWARNINGDo not disassemble or modify the pedestal.• Doing so may cause the unit to fall over and become damaged, which may result in personal injury.Keep the fixing screw out of reach of children to prevent swallowing.• In case of swallowing of the fixing screws, consult a doctor immediately.CAUTIONDo not use any displays other than those given in the catalogue.• Doing so may cause the unit to fall over and become damaged, which may result in personal injury.Do not climb on or hang from the pedestal or attached equipment.• Doing so may cause the unit to fall over and become damaged, which may result in personal injury. (Be particularlycareful that young children obey this caution.)Do not use the pedestal if it has become bent or deformed for any reason.• Doing so may cause the unit to fall over and become damaged, which may result in personal injury.Do not block the ventilation holes of display. When using the pedestal, do not block the space between thebottom surface of the display and the floor surface.• Otherwise heat may build up inside and cause a fire.Do not use in places with high humidity.• After prolonged use, the pedestal may warp or become deformed, reducing its strength. This may lead to the unitfalling over and becoming damaged, which may also result in personal injury.When installing the display, ensure there is at least a 10 cm (3.9 inches) space above and to the sides of,and a 5 cm (2.0 inches) space to the rear of the display.• Failing to do so may result in a fire.During setting-up, make sure that all screws are securely tightened.• If assembly is not performed correctly, the pedestal will not be able to support the weight of the display. This mayresult in the display falling over and becoming damaged, which may result in personal injury.For installation, use the special-purpose constituent parts.• Otherwise, the display may fall off the wall, possibly causing injury.Set up on a stable, level surface.• Failure to do so may cause the unit to fall over and become damaged, which may result in personal injury.Keep the unit away from direct sunlight and heating equipment.• Failure to do so may cause warping, deformation, or degradation of materials which may result in a loss of strengththat may cause the equipment to fall over or break and cause injury.Use the overturn/fall-prevention accessory to secure the Display.• If an earthquake occurs or children climb onto the pedestal with the Display installed, the unit may overturn or fallover, resulting in personal injury.After installing the pedestal, do not subject the display’s right/left/top edge to any excessive force or physical shock. (P.11)• Doing so may cause the unit to fall over and become damaged, which may result in personal injury.Requests regarding handling1) Exercise care when selecting the location for the display because it may discolor or deform due to light or heatif it is placed where it is exposed to direct sunlight, or near a heater.2) Clean the pedestal by wiping it with a soft, dry cloth (such as cotton or flannel). If the bracket is very dirty,remove the dirt using a neutral detergent diluted in water, and then wipe it clean with a dry cloth. Do not usebenzene, thinner, or furniture wax as this may cause the coating to peel.(For information on cleaning the display, see the display’s instruction manual. If using a chemically-treatedcloth, follow the instructions supplied with the cloth.)3) Do not affix adhesive tape or stickers to the product. Doing so may dirty the surface of the pedestal. Do notallow long-term contact with rubber, vinyl products or the like. (Doing so will cause deterioration.)4) Do not subject the display to any excessive force or physical shock.Notes on installing the pedestal♦ For the display power supply plug, use a power supply outlet that can be reached easily.♦ Ensure good air flow so that the ambient temperature does not exceed 40 °C (104 °F).Failure to do this may cause heat to build up inside the display, resulting in malfunction.♦ Panasonic shall assume no responsibility whatsoever for any damage or accident resulting from improper assembly orthe assembly of the product in any manner not specified in the operating instructions or without using designated parts.♦ Remove products that are no longer being used.Caution:This pedestal is intended for only Panasonic display models.Use with other apparatus is capable of resulting in instability causing possible injury.