Panasonic ToughBook CF-P2 Series Operating Instructions Manual

Also see for ToughBook CF-P2 Series: Operating instructions

50Setting with the host computer(1) Conduct steps1 to7 to install ActiveSync ® ( page 36).After step7, at [Set up a Partnership], select [Guest partnership] and follow the on-screen instructions.(2) After completing installation of ActiveSync®, disconnect the cable.(3) On the ActiveSync ® screen, select [File] - [Connection Settings].(4) Add a check mark for [Allow serial cable or infrared connection to this COM port:].(5) Select the same number for the COM port displayed as the following procedure.Select [start] - [All Programs] - [My Bluetooth Places], then select [Bluetooth] (dis-played under the title bar) - [Advanced Configuration] - [Local Services] - [BluetoothSerial Port].(6) Restart the computer.Setting with the CF-P2(1) Make sure that Bluetooth is powered on.(2) Tap - [Programs] - [Panasonic Bluetooth] - [My Device] - [My Services].Be sure to remove the check mark from [Network Type ActiveSync], and add a checkmark for [Serial Port Type ActiveSync], then tap [OK].(3) Tap on the command bar to return to the previous screen.(4) Tap (Refresh Button) on the command bar to search for devices within range.(5) Tap on the host computer that is going to be connected.(6) Tap and hold [Bluetooth Serial Port] and tap [Use to connect for ActiveSync].If you use ActiveSync ® via a USB Autosync cable, tap or - [Disconnect] onthe command bar to disconnect the Bluetooth connection.(7) Enter the PIN code.After entering the passkey in CF-P2, a message will appear in the host computer,indicating that Bluetooth PIN code is required. Follow the on-screen instructions inthe message and enter the same code in the host computer.PIN Code (= passkey)A PIN Code is a password for which you can set up to 16 alphanumeric characters.When establishing security settings, the PIN Code for the device to be connected(slave) must be the same as the PIN Code for the device where the connectionoriginates (master).NOTE(8) Synchronization will start in ActiveSync®.Wireless FunctionsSerial Port Type ActiveSync®